cancel
Showing results for 
Search instead for 
Did you mean: 

General Discussions

Post Your Cinebench R20 Scores Here

So, Cinebench R20 has been released through the Microsoft and Apple stores Cinebench R20 Released - ONLY through Microsoft & Apple stores‌ so let's get to posting a good set of scores. They (Maxon) said it takes 8x the power of Cinebench R15, so you can't compare scores backwards. Be warned, the single core test takes a -long- time. Also include your RAM speed as well.

Intel folks don't be afraid to chime in.

Results so far:

Windows 10 BuildCPUSpeedCores/ThreadsRAM SpeedCPU ScoreSingle Core ScoreMP Ratio
PCWorldXeon W3175X3.1ghz28/56-1303541831.18
PCWorldThreadripper 2990WX3.0ghz32/64-1181242527.79
17763Threadripper 2950X3.5ghz16/32DDR4-3200777644617.45
17763Threadripper 1950X4.1ghz16/32-777541618.7
17763Ryzen 2700X4.3ghz8/16-4422--
17763Ryzen 7 2700X4.1ghz8/16DDR4-320042094269.89
17763Ryzen 7 2700X3.7ghz8/16-40554379.29
16299Ryzen 7 1800X3.98ghz8/16DDR4-320037924019.46
17763Ryzen 7 1700X3.4ghz8/16-34693619.61
17763Ryzen 7 27003.2ghz8/16-34484118.39
17763Ryzen 5 2600X3.6ghz6/12DDR4-320030134097.37
17763Ryzen 5 2600X3.6ghz6/12-2985--
17763Ryzen 5 16003.2ghz6/12DDR4-266625703547.26
UnknownFX-83504ghz4/8-1221--
17763FX-83504.02ghz4/8-1174--
17763Ryzen 5 2500U (Mobile)2ghz4/8-10842853.81

Build 16299 - Windows 10 1709

Build 17763 - Windows 10 1809

145 Replies
jigzaw
Challenger

My 1700X

CB201700X.png

My 2700

CB20res.png

0 Likes

Multithread results only ATM with my 2600X

2600X.png

upgraded my 1700X to 3700X at stock auto settings

ciner203700x.png

cinebench3900X.png

Bit bullet for the 3900X

0 Likes
shinkojiro
Miniboss

2019.03.05-22.17.png

adb1979
Adept I

Single core tested, alongside a slightly slower multithread score.

2600X Single and Multicore.png

jigzaw
Challenger

My HP-15DB0125AU Ryzen mobile 2500U

cb20rm2500U.png

adb1979
Adept I

My 3200MHz RAM had decided to run at 2133

Fixed and new tests run.... Not too shabby

2600X Single and Multicore 3200MHz RAM.png

noodles59
Miniboss

Here my score all stock speed Win10 build 17763.348

pastedImage_1.jpg

Hardwood
Paragon

Using Hyper 212 EVO (dual fans) temp reached just over 50c, ambient ~20c

ASUS TUF X570 wifi, AMD Ryzen 5 5600G, ASRock 6700XT Challenger, Antec Truepower new 700w. 32GB
whales
Adept I

2600X with Wraith Max cooler. Everything is literally undervolted with ram at cl16 3066mhz and I think on the lower score the ram was at 2933 with the same ram timings and sub-timings.  PBO is set to the stock 2700X values. Chassis fans are not maxed out but I do have an extra fan ziptied in the case blowing tward the ram and CPU socket and hopefully blowing some air to the backside of the MOBO.

0 Likes
whiskey-foxtrot
Forerunner

Oscar-Mike V3 (Threadripper 2950X) stock settings. 64GB (CL16) @3200MHz 

pastedImage_1.png

luzifer
Journeyman III

Finally, find time to put all the stuff my wife offer me this Saturday Afternoon :

Ambient Temp° : 23°c // 73.4°F Hand Oc^^ [ Because it's only a 2700 not X ]

Stuff Offered :

Mobo : Asus X470 Prime  // CPU : AMD R7 2700  // AIO : Cooler Master ML 360RGB  // Case : Cooler Master H500M

My X58 Rig died just before my Birthday [ Mobo or Cpu ].... damn I loved this Rig so much...

So my little Lilith  bought me parts lonely in secret...

Cinebench201.PNGCinebench20.PNG

0 Likes
lankfordcodi
Journeyman III

This is my 3241 score with a ryzen 2600x overclocked to 4.25ghz @ 1.47V

3241 in cinebench 20.png

djreversal
Journeyman III

got 13836 today -  https://i.imgur.com/UlUOKpL.png

williamswu_s
Journeyman III

G.skills aegis 16gb 3000mhz to 2933mhz No voltage add-onDesktop Screenshot 2019.04.27 - 16.24.36.19.png

_voodooman_
Journeyman III

Screenshot (3).png

xxcranexx
Journeyman III

Short CBR20.pngI've got a few runs stored in CB for various speeds on this 2700.

benman2785
Big Boss

Ryzen 5 2600U - Acer Nitro 5 (+ 16GB DDR4-2400CL16 + RX560X 4G)
R15: M: 719cb(max - normal is ~650cb) S: 142cb
R20: 1590cb (max - normal is 1444cb) S: not tested took me to long

Ryzen 5 2600X (@1.34V @4.15GHz DDR4-3466CL14)
R15: M: 1490cb (4.2GHz) S: 180cb
R20: M: 3183cb (4.15GHz) S: 425cb


pastedImage_2.png

PC: R7 2700X @PBO + RX 580 4G (1500MHz/2000MHz CL16) + 32G DDR4-3200CL14 + 144hz 1ms FS P + 75hz 1ms FS
Laptop: R5 2500U @30W + RX 560X (1400MHz/1500MHz) + 16G DDR4-2400CL16 + 120Hz 3ms FS
machamba
Journeyman III

Ryzen 1800X 4025 Mhz

CinebenchR20 (msg).jpg

cgorange
Adept II

pastedImage_1.jpg

themadzero
Journeyman III

Windows 10, 64 Bit, Professional Edition (build 17763)

5 2600

2019-06-12 11_15_28-Window.png

mahmod
Journeyman III

Ryzen 5 2600

Screenshot_10.png

papa1959
Journeyman III

cinebench.png

ajlueke
Grandmaster

Ryzen 2700X stock settings.  32Gb RAM 3200MHz (CL14)

Capture.JPG

retromodern
Journeyman III

Acer Predator Helios 500 (PH517-61) upgraded with Ryzen 2700X (Arctic Silver 5 paste on CPU and GPU), 64GB RAM (Kingston HyperX DDR4 2666 C15 4x16GB).

Win 10 1809.

2700X set at 4GHz, 1.225V.

RAM set at VDDCR SOC 0.825V;  Timing:12-16-14-14-12.

test3a.jpg

This system is rock steady, driving built-in native 144Hz display and three additional Samsung SyncMaster 971p monitors.

[Unigine Benchmark, "Extreme" settings score = 3592 with RX Vega 56 set at 718mV, GPU core at 1229 MHz, GPU mem at 890 MHz, max temp 49° C]

ETA:

Testing another Acer PH517-61 system I have, also with a 2700X ("Gold Edition"), stock settings, gave ~3750 Multicore on Cinebench R20.

This seems to indicate an almost direct correlation on the Acer PH517-61 with Ryzen 2700X of 1 Cinebench Multicore point per megahertz.

dpomeroy
Journeyman III

Im not the most savy at overclocking ...

My current rig

 Ryzen 2600 3.85 GHz @ 1.275 V

Corsair RGB Pro 3000Hz @ 3200Hz 1.35 V  Command rate T1

X470 Strix mobo

Been tinkering in bios ,going off youtube guides ;-PCine.JPG

fukyc
Journeyman III

8320 r20 4.5.jpg

d3v_
Journeyman III

R5 2600 @3.4 1.1875v - override, LLC5 on an MSI X470 Gaming Plus w 2x4GB 3000mhz at 1T 16-18-18-38

All core boost at full load is 3.8 with zero fluctuation, due to tuning voltage and LLC.

Note: My LLC5 is not the same as yours, unless it's the same motherboard.

r5 2600.png

texnik2010
Journeyman III

1700.PNG

papa1959
Journeyman III

cinebench3.png

mcalin
Adept III

22072019-1.png

22072019-sc.png

suumaki
Journeyman III

Threadripper 1950x result:

3.85Ghz @ 1.25V

Memory 3200CL14 @ 3333CL14

Extreme settings used, i.e. very unstable.

TR1950X_CinebenchR20_3.85GHz_KR.jpg

reptillusmax
Journeyman III

CB20.png

Cinebench R20: 1558 (MC) | 399 (SC)

BCLK: 101MHz [≈100.94MHz]

CPU: Ryzen 3 PRO 1200 [OC 40.75x ≈4113.43MHz 1.36V]

RAM: G.Skill Ripjaws V 1x16GB 3200CL16 (F4-3200C16S-16GVK) [OC 34x ≈3433MHz CL16 Tightened]

sahu
Journeyman III

Screenshot_73.png

salatapeman
Journeyman III

R5 3600 @4.325GHz with 32GB 3133MHz trident Z (odd mem speed due to ram being oc'd from 2400mhz)

pastedImage_1.png

hi mate

your multi is low meaning mem timings are not optimized, reducing  overall performance

Shintel 9900k @5.1GHz 

32 GB GSkill Trident Z @ 4000MHz

Capture.PNG

Razer Blade i7 9750H 16GB RAM @ 2666 c19

Capture1.PNG

Looks like Zen 2 4.6 beats intel 5.1?! 2019.08.23-05.58.png

Cant do multi at this speed so here is a seperate safe multi-speed

2019.08.21-16.27.png

Unfortunately STOCK boosting doesnt work properly so I have to do it this way  When it does, I should start getting that 532 in single without needing to manual OC.