balzak, please look in "C:\Windows\Minidump" and if there are files there, please compress the folder and attach it here so I can have a look. Please do a Clear CMOS, post a screenshot of Ryzen Master (RM) and let's see if the BSODs cease. Thanks and enjoy, John.
Thanks, balzak. There are two BSODs the same irql not less or equal 0xa. What version and architecture of Windows are you running? I'm still studying. Enjoy, John.
EDIT: Were you coming out of Sleep? Did you get all your drivers from the manufacturers NOT the MB vendor? AMD drivers here. We need a complete list of all your parts.
EDIT2: MS says definite driver problem. Please start removing the latest drivers installed until you establish the bad one.
Thanks, balzak. Your next move is to decide what to replace/RMA to narrow it down. My experience is always been RMA the MB, unless something else presents itself, like memory. I assume you have reformatted your C: disk and installed a fresh copy of W10? Drop the m-audio drivers next time. Please let me know if you can think of something I can help with. Good luck and enjoy, John.
My issue has been my Ryzen 3600 wont post to windows 10 if CPU ratio is not manually set at 28 or 39.5 and it also now gives looped BSOD if SMT is on. It started in September with BSOD caused by Virtualisation switched on. Now in October, it started to crash constantly after I updated to latest bios. The cpu has never recovered. It will give Service Exception, page fault and kernel mode lock aquisition BSOD and others. For now It works well if SMT is off and ratio is either 28 or 39.5. I still get random BSOD tho if I use emulators sometimes. I have upgraded my B350 Asus Prime with Asus B450. Have also tried the CPU on my old Asrock A320M after bios update and have gotten the same issues.
I tried to revert to old bios of July 2019, which dont help.
The issue is that windows wont boot, but I get the above BSOD. If the CPU ratio is put on Auto, the windows circle at post will just spin infinitely like the cpu is operating at very low frequency and never do anything.
I only had bsod on idle with my b450 tomahawk non-max and ryzen 3600. I RMA'd the mobo and cpu and they replaced the cpu. Everything works fine now with default settings. No more endless searching for workarounds! I advice you do the same. Good luck!