cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

PC Graphics

Nekropl
Adept I
Tuesday

The processor in games is almost always loaded at 100%, the video card is bottlenecked?

Computer Type: Desktop

GPU: PowerColor RX 6700 XT Red Devil

CPU: AMD Ryzen 5 5600 6-Core Processor

Motherboard: Gigabyte B450 GAMING X

BIOS Version: F67d

RAM: 32GB G.Skill AEGIS 3200 MHz

PSU: Chieftec A80 650W

Operating System & Version: WINDOWS 11 PRO 24H2

GPU Drivers: 24.20.33.01-241127a-410212C-AMD-Software-Adrenalin-Edition

Background Applications: DISCORD, FIREFOX

Almost in all games the video card is not loaded at 100%, and the processor is never loaded less than 50%, if the game is not demanding, the load of the CPU will be 50+, and the video card somewhere 10-20%, if demanding - the load of the CPU will always be 100%, and the video card somewhere 50-60%, what could be the reason? Drivers through DDU reinstalled and more than once, video card is underwalted. I've been trying to overcome this problem for a month and nothing works. The problem manifests itself most vividly in Helldivers 2.

1 Solution
Nekropl
In response to FunkZ
Adept I
yesterday

Yesterday I tried to overclock the RAM, as a result of which I had to reboot several times all the bios settings, as a result today I went to the same Helldivers 2 - CPU load became normal again, quietly 50% of the CPU is only loaded, not 100% as it was before, also I updated the chipset driver when I fixed Ryzen Master, apparently the problem was either in the bios or in the chipset, but apparently the problem was solved. (also i found that system for some reason not using 0 thread (first thread) from the CPU, but uses all others) And if you load the processor with stress test - the thread comes to life and starts working, but while playing something or using the system then refuses to work.
Update: nevermind, after a few reloads thread now working fine

View solution in original post

0 Likes
4 Replies
FunkZ
Grandmaster
Tuesday

What game resolution and graphics setting?

More than one monitor?

 

Ryzen R7 5700X | B550 Gaming X | 2x16GB G.Skill 3600 | Radeon RX 7900XT
Ryzen R7 5700G | B550 Gaming X | 2x8GB G.Skill 4000 | Radeon Vega 8 IGP
Ryzen R5 5600 | B550 Gaming Edge | 4x8GB G.Skill 3600 | Radeon RX 6800XT
0 Likes
Nekropl
In response to FunkZ
Adept I
Tuesday

only one monitor, playing on 1080p, graphics most likely medium because i have high refresh monitor and wanna get as much fps as possible, people say's that i have CPU bottleneck in that case.

0 Likes
FunkZ
In response to Nekropl
Grandmaster
Tuesday

Yes, 1080p resolution with medium graphics quality will put more load on the CPU.

5700X3D would be a drop-in upgrade for you and should greatly improve CPU performance.

 

Ryzen R7 5700X | B550 Gaming X | 2x16GB G.Skill 3600 | Radeon RX 7900XT
Ryzen R7 5700G | B550 Gaming X | 2x8GB G.Skill 4000 | Radeon Vega 8 IGP
Ryzen R5 5600 | B550 Gaming Edge | 4x8GB G.Skill 3600 | Radeon RX 6800XT
0 Likes
Nekropl
In response to FunkZ
Adept I
yesterday

Yesterday I tried to overclock the RAM, as a result of which I had to reboot several times all the bios settings, as a result today I went to the same Helldivers 2 - CPU load became normal again, quietly 50% of the CPU is only loaded, not 100% as it was before, also I updated the chipset driver when I fixed Ryzen Master, apparently the problem was either in the bios or in the chipset, but apparently the problem was solved. (also i found that system for some reason not using 0 thread (first thread) from the CPU, but uses all others) And if you load the processor with stress test - the thread comes to life and starts working, but while playing something or using the system then refuses to work.
Update: nevermind, after a few reloads thread now working fine

0 Likes