do you talk about this setting? What should I put? so I should put this setting that you tell me in the bios save and then turn off the pc and mount the rx 570? post aida bios e power unit without rx 570
do you talk about the choice between integrated card and the PCI? that voice is there that I have to put pci and then put down and mount the board? now looking there and also this aspm says to activate it that I do the active and then I try to mount the card?
guys a stupid question the installation in the picture below integrated graphics and should mandatory before mounting the r57? can it be that
for this thing I get the code d6 and d7 from the debug display when the card is mounted? and the only thing I've never tried cmq. and price
made me the return procedure and specify if I want the same product or the money back I would not want to make a trip to empty to my card
and then the problem was not her
Merry Christmas guys !!!! I think I have come to the head of the computer technician as ahahahaha, I tried both my hd6670 card and the new rx570 in a nn uefi nn system having uninstalled the drivers first and without setting anything with a techno 625 techno the 6-pin connector in the 8-pin and both tabs work, I made the mistake of buying a new card thinking it was that route without evaluating on another system if the old one worked, now I am from a charge of 180 euros to 180 + power supply60 + or new motherboard with a new processor about 200 euro provided that nn can not find a ddr3 must I also change the ram, or take an Asus F1A75-V EVO to 61 euro regenerated on this site recommend me a little you! !!!
https://it.empowerlaptop.com/p/asus...xELEaanZaRvZObE9I7GhY8zK8kXZ9JFYaAkgoEALw_wcB
I enclose photos of the test done and look at which system was running the RX 570
nothing to do guys are here to update that unfortunately all your precious suggestions nn are served remains in the debug display of the motherboard the code d6 ie No Console Output Devices are found and d7 No Console Input Devices are found believe that the only shaping that moreover, and the brand of the motherboard and the amd processor board and processor work together for video cards, can they solve this problem, ie the video card is faulty or is there any incompatibility between their hardware? and it is the fact of being a fan of amd and shappire led me to have a configuration all set on them but and for a while I think that perhaps intel envy is more reliable but less stylish in looks! I also tried to start without the 8 pins put on the fly to see if the PCI-Express slot worked and works because the card lights up the current comes even if the fans do not run as so and powered only by 75w and not for the 180w that serves him around !!! I point on the failed card because I can not find other explanations the bios has been updated to the latest version and has been set the uefi mode that my card calls efi I think, that from aida tells me bios uefi but in the entry uefi boot tells me no and this too is a probable problem I think, cmq. the fact remains that the d6 d7 and 10 beeps are the problem and only they shappire amd can solve it in one way or another, I hope that nn let me also change motherboard and processor because I'm already rx570 = 183 euro sharnook wpc 650w = 62 euro adapter vga / hdmi = 9 euros and are 254 euros if I also sheda mother and decent processor I spend another 200 euros and we are almost 500 euros and nn I had foreseen all this, without going to touch the ram I'm forced to take one ddr3 because otherwise I have to change the ram too 
I also did a video
THANKS OF HEART CMQ. BOYS!!!!
video is here https://www.facebook.com/ANDREA.SCIROCCHI1/videos/10217685809526989/
