I tried again.
If I leave the window like above for ~ 5 - 10 minutes it eventually responds.
Wht are the Radeon Overlay buttons like this:
Yet when the GUI is opened the same buttons are now two separate buttons like this, taking up large amout of space in the GUI for no reason at all:
As a test case - BFV 4K Ultra, Game Frame Rate Limiter set to 120. DX12 and DX11 tested.
Adrenalin 2020 20.1.3 I can no longer use Chill_Min = 30, Chill_Max = 300 to achieve keyboard only input FPS of 55 and play the game without the GPU crashing because the Frame Rate in Chill is no longer clamped to CHILL_MIN or by a separate Global FRTC Limit which has now been removed but you now tie it to Chill_Max. This happens in both DX11 and DX12.
If I use use Chill_Min = 30, Chill_Max = 59 to achieve keyboard only input FPS of 59 I only see keyboard only input FPS of 59. Rapid mouse movement is tied to Global FRTC.
Here are some screenshots of what happens now.
DX11 test:
Rapid mouse movement locked to 59 FPS:
No input - 30 FPS:
Keyboard only Input. W held down. Walking - 40 FPS.
Shift + W held down Running - 40 FPS.
Settings used:
DX11 Anvanced video settings used:
BFV DX12 test settings chanded to turn DX12 on:
I see the same results as above for DX11 with Chill_Min = 30, Chill_Max = 59. I see same low 40 FPS keynoard only input and I see that rapid mouse movement is no longer clamped to Chill_Min and I see that Rapid mouse movement is only clamped by Global FRTC = 59.
I need to set Chill_Min = 30, Chill_Max = 300 to get a keyboard only input FPS of 55:
DX12:
Keyboard only Input. W held down. Walking - 55 FPS.
Keyboard only Input. Shift + W held down Running - 55 FPS.
Rapid mouse movement no longer clamped to Chill_Min: It goes as high as 85 FPS - this screen capture caught it at 85 FPS.
Because Global FRTC is clocked to Chill_Max and I need to set Chill_Max to 300, the GPU burns too much power and it overheats.
I get Blue Green Flashing follows by a GPU and PC Black screen, audio buzz and crash.
Here is an example of the screen corruption I see before crash:
Now - in thius case I have set the Frame Rate Limiter for the game at 200 because I want to test how Chill works and this is a general case.
BFV does have Frame Rate Limiter options of Monitor Refresh Rate, 60, 120, 144, 200.
Not all games do.
Turning on Enanced Sync with Vsync on when the GPU is low temp in DX12 is freezing the PC.
Vsync on is not an option.
Installing RivaTuner Statistics Server, and setting it to 59 FPS stops the screen tearing when running BFV DX12 4K Ultra with Frame Rate Limiter at 60 and Chill_Min = 60, Chill_Max = 300.
This proves to me that need a separate Global FRTC which is not tied to Chill_Max in the Adrenalin 2020 Drivers.
So we still need Global FRTC, Chill_Min, and Chill Max sliders.
In addition the option to limit rapid mouse movement to Chill_Min is needed: - That was the power saving improvement put int Chill in Adrenalin 2019 release.
Letting FPS ramp up to Chill_Max = 300 is a pointless waste of power with rapid mouse movement because the image is blurry anyhow.
Finally some way to adjust Keyboard only input FPS is needed.
But it think it will never be implemented because AMD either don't care about Radeon Chill working properly or do not understand it.
It seems someone decided that only two sliders and therefore Chill_Max was tied to "Global FRTC" - this cripples keyboard only input FPS so they decided to remove the power saving that clamps rapid mouse movement to Chill_Min to make it look like the "useful" FPS is higher than it really is.
Clearly Screen Tearing in FreeSync is not a concern and neither is fixing Enhanced Syc so it doesn't freeze games / PC with Radeon Chill on.
I wait for the next Adrenalin 2020 release.
Adrenalin 20.1.4.
Looking at GUI Scaling.
4K 60Hz BenQ 32 inch monitor with HDR.
My feedback has been the GUI is just far too large and the scaling is wrong, meaning I have to use a scrollbar just to see the menu options.
The Default scaling is 150%.
Setting a Custom Resolution Scaling of 149% or lower in Windows 10 Pro results iin this.
The text is too small and clearly there is lost of space wasted in the GUI.
This is the best I could do.
I still need a 3 screen high scroll bar to read system information for 3 GPU on the PC.
So with Default Windows settings the GUI Text, buttons and GUI interface is far too large.
The best result I gould get using Windows Scaling - the text is too small and there is lots of wasted space in the GUI itself.
If anyone has any better idea how to scale this GUI I would be grateful to know.
Latest features to vote for here;
Nothing about improving the Adrenalin 2020 Ease of Use / Ergonomics.
No real idea for what is intended but I voted anyhow.
Nothing about FRTC and Chill.
OFF TOPIC:
I actually never had any problems with Nvidia though I never had many either, I mostly bought ATI before AMD, but back then I paid close to 300€ for a ATI X1800GTO and when it broke I grabbed my bro's 150€ Nvidia and the performance overall was much better and some games which were running super bad or not working on the ATI was working fine on the crap cheaper ugly small Nvidia back then...
Last Nvidia I had anyway was the GTX570 and never had problems with it neither drivers, actually that was the best GPU I ever had the huge 3 slot Asus DirectCu II cooler I flashed it with a 1.2V unlocked bios and OC around 25% more from stock clocks (stock is 732mhz for a normal 570 and I used 910-915mhz) and a lot on the memories too and fan speed to 60 - 70% which wasn't even much loud and never reached 80Cº gaming neither had crashes, even did a 2 day lan party without turning the game off and on a demanding game for that old GPU but with the OC it could keep it very close to 60FPS 
...
Anyway then I went for a reference RX480 and returned it the next day, it was running above 90Cº jumbo jet loud and not even keeping advertised clocks + a huge amount of problems... I waited for Asus Strix RX480 and bought it and sadly for more than a year the GPU never worked and I couldnt play almost any game as everything was freezing, crashing, BSOD, red screen of death, green screen, pink screen, everything that I never had before with the Nvidia which run everything fine...
I even RMA the Strix RX480 and received it back from Asus saying GPU is fine, it was really AMD's drivers fault which got stable more than a year later only, also I got full stability only after Strix RX580 launch and I flashed Strix RX580 OC bios on mine which is still the GPU I have...
ON TOPIC:
Anyway I'm pretty pissed with this 2020 AMD drivers which have no custom installer so that I wouldn't install a lot of stuff I dont want and no way to disable performance metrics and even game adviser which is off but keeps advising, this is by far what pisses me most because I have a old CPU and after 2020 AMD drivers it makes way more CPU stuttering than ever because it keeps logging performance of my games which I never asked for.
I already closed all AMD processes\services from windows and boom, Post Scriptum instantaneously run a lot smoother with much less CPU stuttering without the AMD software interfering, I want a custom installer with the option not to install game adviser, AMD Link, AMD performance metrics, built-in internet browser and all optional extra stuff.
PS: IN MY OPINION THIS IS A VERY BAD PRACTICE CRIPPLING PEOPLE'S PERFORMANCE ON PURPOSE, specially like me who have a older CPU so that we have to go run and buy a new Ryzen right away, One thing is adding performance metrics optional + other stuff that makes gaming performance worse AND other thing is making everyone locked into having to use it with no option to uninstall or even disable and the only way to get rid of it is never installing drivers and using the GPU for nothing or having to go back install very old outdated drivers from 2019...:(
Yeah but it also hasn't got the fixes for latest games that they add from time to time... Though not that I care as I mostly play is Post Scriptum and the performance metrics is pissing me off as its causing way more CPU stuttering for nothing as I don't even want that extra feature 
...
Anyway I won't upgrade so soon as Next Gen consoles are coming this year and AMD still has no Hardware accelerated Ray-tracing capabilities in any GPU and also 4K performance-per-price is still a joke on current both AMD and Nvidia GPU's...
I'm probably actually going to wait for DDR5 to arrive and buy a next gen architecture with new sockets from both intel and AMD and keep playing on this old PC at 1080P and maybe buy a PS5 by the end of this year if the price is right...
Anyway I'm more inclined to pay extra and go for Nvidia on my next build as I'm tired of having to wait more than a year for a new AMD GPU to start finally fully working stable and with good performance, at least I had enough with my RX480 that took almost 2 years to start working and I also have annoying low quality dotty\pixelated textures which are reported for years on many AMD GPU's on a lot of games specially on vegetations, one of the games really bad looking is Dirt Rally (the 1st one, on steam there's a huge amount of people reporting the same grainny\dotty\pixelated vegetation, trees on many AMD GPUs even from the AMD "HD" older generation of GPUs) and AMD never cared and never added to the known problem list, I also reported the problem and they never replied...
This is what I'm talking:
On my old Nvidia that problem doesn't exist and also even while loading wind10 the middle spinning dots are already pixelated compared to Nvidia and then only gets normal after windows loads with the software kicking in but still shows on a lot of games specially in vegetation...
I cannot put up with the Adrenalin 2020 GUI/UI.
So I decided to try this.
Adrenalin 2019 19.12.1 GUI / UI with the Adrenalin 2020 20.2.1 drivers installed.
Make sure you have a copy of the full download install files for Adrenalin 2019.19.12.1 and Adrenalin 2020 20.2.1 ready.
Just used DDU in safe mode disconnected from theInternet to remove previous AMD Drivers.
Reboot into normal mode still disconnected from the Internet.
Extract and install Adrenalin 2019 19.12.1 and ReLive.
Reboot into normal mode so all of my GPUs show up.
Disable Crossfire and reboot into normal mode so Crossfire turns off.
Extract Adrenalin 2020 20.2.1 into a folder somewhere.
Then open Control Panel with Administrator Priviliges.
Go to Device Manager -> Display Adaptors.
Then do this, for example:
