I've been tweakin my set up to see what kinda numbers I can get. I originally went into the bios and changed my Corsair Vengeance RGB Pro to ensure it was set to 3200.
I was looking at the guide here [Motherboard]How to optimize the Memory performance by setting XMP or DOCP in BIOS? | Official Suppo... and went into the bios and turned DOCP on. I am now seeing the memory speed as 3600mhz
Trying to find the answer online and trying a few forums also. This seems like its probably something I shouldn't be doing with the memory.. or at least that much higher than the 3200mhz it's meant to be.
Should I turn DOCP off and go back to the 3200 as it was ? Are there possible risks with leaving it as is ?
==================
GPU: Red Devil Limited Edition RX 6800 XT
CPU: Ryzen 9 3900X
CPU Cooler: ARCTIC Liquid Freezer II 280
MB: Asus ROG Strix X570-E
MEM: Corsair Vengeance RGB Pro 32 GB (2 x 16 GB) DDR4-3200
PSU: Corsair HX Platinum 1000 W 80+ Platinum
CASE: Fractal Design Meshify S2
Mon1: MSI Optix MAG271C 27" 1080p 144Hz
Mon2: DELL OMEN 27i 27" 1440p 165Hz
