Hi, I'm trying to get my SAM to work for a while I'm so close to give up but I want it to work.
I have enabled Re-size bar, above 4g and my Bios is UEFI. But still SAM is not working.
I'm checking resources on my GPU properties I don't see "large memory range"
I'm checking AMD Radeon Software, it says "Smart Acess Memory Not Available"
any help appreciated.
GPU: RX 6800XT
CPU: AMD Ryzen 7 5800X
Motherboard: MSI B550-A PRO (MS-7C56)
Re-size Bar enabled, above 4g enabled, UEFI
Open 'Disk Management'. you should have a small partition labeled 'EFI System....'.
If you have that, then you also need to disable 'CSM' in mobo bios settings.
I see Healthy EFI System partition on disk management yeah,
I searched everywhere but I can't find anything about disabling CSM in bios. I have an indicator on top it says CSM/EUFI, there csm is gray and uefi is highlighted.
Download GPU-Z. https://www.techpowerup.com/download/techpowerup-gpu-z/
Run it, go to advanced tab, then select PCIE Resizable Bar from the drop down tab and post a screenshot of what you see.
Here is mine.
Okay so after some more digging, I updated/m-flash my bios to latest and got gpu-z to show resizeable bar enabled. however AMD Radeon software still says SAM is not available. check the screenshot below. Also thank you all for the support I feel like I'm close to get this thing to work
What build of Windows are you using? Is your OS up to date?
Are you using 21.9.1 drivers which are the current latest?
You may also want to try a Clean driver Install and Factory Reset of 21.9.1.
Instructions here on how to do a factory reset. Install AMD Radeon™ Software | AMD
May be a longshot, is Pcie x16 set to Gen.4.