hello! another post from me, so I would like to know how to make amd dash work, I have enabled it in my system's bios but I can't connect to it with AMC Console
yes the system is connected with ethernet
it shows this but dash is enabled in the bios
Is the target workstation powered on or off at time of discovery?
Does the target workstation have Wake on LAN enabled in BIOS?
Have you installed the client on the target workstation?
the workstation is powered on
wakeonlan is enabled
may I know how to install the client on linux?
https://www.amd.com/en/support/downloads/manageability-tools.html
I have installed the acms and the dash cli, how may I use them? when I run dashcli I only see for managing other computers but not current one
This is a solution for management of remote computers over a network.
Are you stating you're trying to manage your local computer using this?
Yes
Why? If you're physically on your local computer why do you need to use a utility designed for remote management to access it?
If you're just trying to test how it works and don't have a second computer to connect to you could try connecting to 127.0.0.1 but no idea if the app will accept that. You really should setup a second computer for this.
also I was able to download a hp bios utility for linux and as you can see it shows amd dash as being enabled
(HOWEVER wake on lan seems to be disabled so I'll have to see how to use this hp tool to enable it)
I was wrong, both Dash and WOL are enabled, I'll try using AMC Console again I suppose?
still not work, amd dash is enabled and WOL is configured to boot from hard drive, are those settings correct?
same problem as before