cancel
Showing results for 
Search instead for 
Did you mean: 

PC Drivers & Software

Vceabal
Journeyman III

Ryzen Master Crashing

, I’m trying to under volt my ryzen 9 7950x using the ryzen master apps “optimize all cores” feature. After I let it run snd reset windows  I see my login screen for about .5 seconds and then it crashes.Anyway  I could make this work? I couldn’t find any articles about it immediately crashing after the system resets. 

if needed I have a 

MSI pro x670 WiFi motherboard

ryzen 9 7950x CPU

2 Replies
FunkZ
Grandmaster

Curve Optimizer will apply an offset to the processor voltage. Set a negative value across all cores. Start with something small like -5, and use an all core workload like Cinebench to verify stability, then try -10, etc. Repeat until no longer stable then go back to previous value.

If you don't like trial and error, you could alternately go into BIOS and set a lower TDP. You will lose a small amount of performance this way but have a lot less voltage and heat generation.

Ryzen R7 5700X | B550 Gaming X | 2x16GB G.Skill 3600 | Radeon RX 7900XT
Ryzen R7 5700G | B550 Gaming X | 2x8GB G.Skill 4000 | Radeon Vega 8 IGP
Ryzen R5 5600 | B550 Gaming Edge | 4x8GB G.Skill 3600 | Radeon RX 6800XT
0 Likes
Bhammer
Journeyman III

I have the same issue. i don't know what happened really. 

mine is ROG strix B650E-E. it was fully fine until i updated my bios to the latest version. Well maybe. I did not use RM for like 5 months already and now  RM suddenly freezes when i try to adjust timings and voltage. I've tried everything (Uninstall and Reinstall RM) but nothing works. 

I also tried just puting it to Manual mode then apply but RM still freezes 

0 Likes