cancel
Showing results for 
Search instead for 
Did you mean: 

PC Processors

bobi6
Journeyman III

XMP

How do i enable XMP on AMD Ryzen Master???

0 Likes
3 Replies
Francobér
Adept III

XMP profiles are activated in the bios under the RAM settings

AMD Ryzen 5600X, Asrock X570 Steel Legend, 32GB G Skill Trident Z Royal Gold, AMD Rx 7900XTX, Gygabyte G34WQC
0 Likes

Hit Del/F2/F12 depending on your board.

Head out to memory profiles page or something like overclock (because XMP is considered just that), or search D.O.C.P.

Enable hit and let it reboot, if all goes well just confirm it on Windows Task Manager.

johnnyenglish_0-1645562311891.png

If you get stuck on a boot loop, you may have to loosen up the timings, dialing up/down voltage or settle with a lower XMP profile. Ryzen IMC can be picky sometimes.

I had my share (and still do) of problems and the only thing I had to do to mitigate was decreasing voltage by a notch.

Check your board QVL, its not mandatory but you may want to look into it.

Cheers

 

 

The Englishman
0 Likes

This happened to me. I enabled XMP Profile but after that Boot Failure. I had to do CMOS reset to get around it. What could be a good solution for this? As of writing, I have updated my Gigabyte Eagle b650 ax MoBo (28.08.2024 version) SHould I change RAMS? I am using Kingston Fury 16gb (8gb x 2) 

0 Likes