Processors

[kiario]

Nothing is limiting my 7800x3d to go higher. Not PPT, not TDC and not EDC.

Why does it only draw 75 watts benching in cine and prime? Temps are 79 degrees.

Why does it not draw higher watts?

In bios these values are set to 120/80/120.

[Earnhardt]

Information Required When Posting a Discussion

Please:

• Search the forums for existing discussions which may contain a solution to your issue before creating a new discussion.
• Use a title that accurately summarizes your issue. Do not use titles like “Help Me” or “Driver issue”.
• Post your discussion in the appropriate board for a faster and more helpful response.

When creating a new discussion, please provide as much detail as possible describing your issue, including the steps to reproduce the issue.

Below is an example of the essential information to provide when posting a new discussion.

Describe your system:

• AMD Graphics Card Make & Model
  • Radeon VII
• Desktop or Laptop System
  • If a laptop, Make and Model of the Laptop
• Operating System
  • Windows 10 64bit 1909 Build
• Driver version installed
  • Radeon Software Adrenaline 20.10.1
• Display Make and model and connection/adapter in use, resolution, and refresh rate.
  • Samsung UE32850R 3840x2160 @60Hz Active DP to HDMI adapter
  • One line for each display device connected
• CPU/APU Make and model number
  • Ryzen 5 5600X
• Motherboard Make & Model + Bios Revision
  • Asus X570 Prime Pro BIOS 2802
• Power Supply Unit Make & Model + Wattage
  • Seasonic Focus 750W Platinum
• System Memory Make & Model + Frequency
  • GSkill Trident Z RGB 3200Mhz CL14 2x8GB

 Describe your issue:

• Provide a detailed description of the issue you are experiencing, and the steps required to reproduce the issue.
• Details about applications/games affected (including version number)
• Graphical settings used in the application/game (resolution and 3D settings)
• If possible, include a screenshot or video link of the issue

[johnnyenglish]

Why have you lowered those values? The 7800X3D is a 120 TDP part.

 

[kiario]

I have not limited the cpu. checking cpu-z it says 120 tdp. But the q is why does it only go to 75 watt in benching?

[johnnyenglish]

In your first post you wrote:

In bios these values are set to 120/80/120.

Normally, in BIOS these 3 values stand for PPT/EDC/TDC 

So please clarify, because 120/80/120 is not what a 120 TDP CPU should have. Thus, you could be running the CPU in some sort of ECO Mode.

Check table above.

[Ezio20PL]

Nothing is limiting its just prime spreads load across whole cpu (cores/cache,etc) instead just cores like cinebench but this doeasnt mean that cb is more stressfull. CPU Core Current (SVI3 TFN)  shows that  prime95 is pulling more power

If you want to prime95 to pull even more "disable avx-512"  + use  small fft....maximum power.. Its also great way to do test curve optimzer undervolt this way.

[kiario]

ok thanks for the info. Also, why does it not get closer to 120 tdp?

[bissag]

I have around the same limit 78w - 80w on my 7800x3d trying prime or cinebench

guess it is normal ?

[Koyote7667]

Yes

[misterj]

kiario, do a Clear CMOS then post a screenshot of Ryzen Master (RM) running Cinebench R24 Multicore and Single Core. Also notice this:

John.