Never heard of Boundary Scan until now when I googled it.
It involves a very Technical Field in debugging of circuit boards as per Wikipedia:
Boundary scan is a method for testing interconnects (wire lines) on printed circuit boards or sub-blocks inside an integrated circuit. Boundary scan is also widely used as a debugging method to watch integrated circuit pin states, measure voltage, or analyze sub-blocks inside an integrated circuit.
The Joint Test Action Group (JTAG) developed a specification for boundary scan testing that was standardized in 1990 as the IEEE Std. 1149.1-1990. In 1994, a supplement that contains a description of the Boundary Scan Description Language (BSDL) was added which describes the boundary-scan logic content of IEEE Std 1149.1 compliant devices. Since then, this standard has been adopted by electronic device companies all over the world. Boundary scan is now mostly synonymous with JTAG.[1][2]
You can try an post your question at AMD Developer's Forum from here: https://community.amd.com/t5/newcomers-start-here/bd-p/newcomer-forum
If this concerns a Server type environment then post here: https://community.amd.com/t5/server-gurus/ct-p/amd-server-gurus
Or you can open a AMD Support Online ticket and ask them directly from here: https://www.amd.com/en/support/contact-email-form
