cancel
Showing results for 
Search instead for 
Did you mean: 

PC Processors

xoohzen
Newcomer

Ryzen 7 9800X3D UP TO 95 degrees !

Hello,

I just finished assembling my PC. After a few tests, I noticed a temperature of 50-60°C at idle and over 95°C when I launch a game like Call of Duty, for example.

It seems extreme to me.

Do you have any idea where the problem might be coming from?

The BIOS is up to date,
and no, I didn’t forget to remove the plastic from my AIO...

Thank you very much!

 

 

0 Likes
1 Solution
xoohzen
Newcomer

Hey,

 

Thanks for your reply. I solved the issue by removing the pump from my AIO. I noticed that the thermal paste pattern was very small, which made me think there wasn’t good contact between the AIO plate and the CPU. So, I cleaned everything up, reapplied thermal paste, tightened the screws better, and now I’m at 35-45 degrees in idle and a maximum of 70-73 degrees under load. (Room temp around 25 degrees)

 

(The AIO is set to exhaust, the rear fan as well, while the three side and bottom fans are set to intake.)

 

I still want to thank you for your quick response and your willingness to help.

 

PS: Here’s a photo of the build.

IMG_1212.jpeg

Lucas

 

View solution in original post

0 Likes
2 Replies
FunkZ
Grandmaster

What AIO do you have? How is it positioned in the case? Top? Front? Intake? Exhaust? Pics would help.

 

Ryzen R7 5700X | B550 Gaming X | 2x16GB G.Skill 3600 | Radeon RX 7900XT
Ryzen R7 5700G | B550 Gaming X | 2x8GB G.Skill 4000 | Radeon Vega 8 IGP
Ryzen R5 5600 | B550 Gaming Edge | 4x8GB G.Skill 3600 | Radeon RX 6800XT
0 Likes
xoohzen
Newcomer

Hey,

 

Thanks for your reply. I solved the issue by removing the pump from my AIO. I noticed that the thermal paste pattern was very small, which made me think there wasn’t good contact between the AIO plate and the CPU. So, I cleaned everything up, reapplied thermal paste, tightened the screws better, and now I’m at 35-45 degrees in idle and a maximum of 70-73 degrees under load. (Room temp around 25 degrees)

 

(The AIO is set to exhaust, the rear fan as well, while the three side and bottom fans are set to intake.)

 

I still want to thank you for your quick response and your willingness to help.

 

PS: Here’s a photo of the build.

IMG_1212.jpeg

Lucas

 

0 Likes