The processor does not recognize the SSD after restarting or when turning on the PC for the first time after connecting it to a power outlet.
**Restarting Windows:**
When I restart the computer through Windows, it goes directly to the BIOS. To detect the SSD again, I need to manually turn off the PC using the Power button and then turn it back on.
**Total power off:**
If I leave the computer unplugged for a while, when I turn it back on, the SSD is also not recognized. In this case, I need to repeat the same process: manually turn off the PC using the Power button and then turn it back on for the SSD to be detected.
**Note:** The SSD presents incompatibility issues with the Ryzen 5 5500 processor. However, the SSD does not show these issues when using a Ryzen 5 1600 processor.
**Attempts to resolve the issue:**
- I updated the motherboard BIOS.
- I replaced the motherboard battery.
- I reset the BIOS to factory defaults.
- I tested with two Ryzen 5 5500 processors (other NVMe SSDs worked perfectly with both processors).
**System configuration:**
- CPU: Ryzen 5 5500
- GPU: RX 5700 XT 51 Risc
- Motherboard: Gigabyte B450M DS3H V2
- Power Supply: MSI 600W
- RAM: Gloway 3x8GB
- NVMe: Movespeed 512GB [YSSDMP-512GN3000] (with 512MB DRAM)
---
