So my girl friends pc i wanted to upgrade ram on that from 16Gb team group cl 22-22-22-52 1.35V to some 32 GbG.skill Cl 16-19-19-39 1.35V but with that using xmp in bios.
The first kit was faulty sometimes i coulden get it to boot and sometimes i got booting errors like missing files and bsods memtest86 found alot of errors, so i rma'ed them and got a new kit the same and this ran fine for the first 10 bots then i gave me a boot issue cant remember the code but after a reset and trying getting into the bios the were only wierd lines in that no text, then i decided with xmp enabled to run memtest86 2 passes without errors then i tried bunping up the voltage to 1.45 no luck still sometimes i would give me boot problems, other times i ran perfectly fine its 2x 16Gb sticks to not stress the memory controller on the cpu.
Could it be the cpu's memory controller is not good and ony allows 3200mhz?
The first kit also didnt wanna do even 3200 Mhz Cl 16-19-19-39 1.35V.
3600 Mhz Failed and gave boot problems and bsods.
3533 Mhz Failed and gave boot problems and bsods.
3466 Mhz Failed and gave boot problems and bsods.
3400 Mhz wouldent even give me a pciture oddly enough
3333 Mhz Failed and gave boot problems and bsods.
3266 Mhz loads for windows but comes up with errors in windows memory diagnostic at 5%
3200 Mhzseemed to be stable but i was wrong for windows memory diagnostic no errors but memtest86 comes up with 2 errors before it is over 50%.
Amd Ryzen 3600
Asrock b550m pro 4 (Bios 3.40)
Cooler Master MasterLiquid ML120R RGB - CPU Vandkøling - Max 30 dBA
Corsair Hx 1200I 2024 Atx 3.0 Psu
Sapphire radeon rx 7900 xtx nitro+ oc 24gb
1x 16Gb Ddr 3200 Mhz
1x samsung 950 pro 512 Gb
2x Kingston 240Gb
anyone have exsperienced this and could aid me?
