cancel
Showing results for 
Search instead for 
Did you mean: 

PC Processors

mnkinnel
Journeyman III

Power Reporting Deviation Accuracy

In hwinfo64 this value is shown in red and the minimum is 20.9% maximum 51.9% and average 36.7%. I ran it for a bit while playing a game. is this of concern and what does this mean? I am using a ryzen 9 5900x

0 Likes
6 Replies

See the thread at, https://www.hwinfo.com/forum/forums/general-discussions.6/

 

Ryzen 5 5600x, B550 aorus pro ac, Hyper 212 black, 2 x 16gb F4-3600c16dgtzn kit, NM790 2TB, Nitro+RX6900XT, RM850, Win.10 Pro., LC27G55T..
0 Likes

Ok thank you I've read it but is there anything I can do? I've already replaced this cpu once before because it randomly failed after about a year

0 Likes

I also just tried with cinebench so it's running at 100% and maximum it got to was 54.8%

0 Likes

You used R20 ?, doesn't look good. Are you looking at the 'Current read out' while it is running?

Motherboard bios up to date, what month/year.

You might need to contact mobo maker support/forum for help.

 

Just ran it on my board, was 101-102% (is good). CPU-Z stress test is not far off, 98.4 to 100.7%.

  

Ryzen 5 5600x, B550 aorus pro ac, Hyper 212 black, 2 x 16gb F4-3600c16dgtzn kit, NM790 2TB, Nitro+RX6900XT, RM850, Win.10 Pro., LC27G55T..

R23.

I contacted asus couple days ago and they said they cannot help me with it. I updated the bios to the latest but now it seems to be bricked as I can't select a boot drive.

Tried many things disconnecting the battery and windows drive so I am sending it for repair tomorrow.

I think I uncovered many issues with this motherboard... bluetooth and onboard graphics not working either perhaps it is the cause of my first amd chip failing 

0 Likes
misterj
Big Boss

mnkinnel, hwinfo64 is a third party free application. I suggest you talk to them. I strongly recommend you use Ryzen Master (RM) for making decision. John.

0 Likes