Greetings
After burning two MoBo and almost burning two others, I discovered what was happening with my PC. the CPU/HT reference is rising uncontrollably. Are peaks of 2~10 seconds. this is normal? Because I have a lot of instability during use and as I already said, two MoBo were killed
In the BIOS the CPU/HT reference is manually set to 200Mhz. I already configured all possible clock and multipliers (RAM clock, HT multiplier, CPU multiplier, NB/CPU clock) to the default or the minimum and even then the elevation continues to occur
Can anybody tell me what's going on?
I currently have an M5A78L-M USB3 / PLUS and an M5A88-M. I used a Phenom II X4 B55 and FX-6300 and the clock also went off. I have screenshot but I do not know where it is
Other hardware used:
2x4 Corsair DDR3 1333mhz
2x8 Hyperx DDR3 1600mhz
PSU: EVGA 450W B1
Corsair CX600V2
TY!!
![unknown[1].png unknown[1].png](/t5/image/serverpage/image-id/25861i177E06326B308832/image-size/large?v=v2&px=999)
![5a711a3e37e7e_19kOC.png.bf8dee5defda2e97ca9701b14ce2debf[1].png 5a711a3e37e7e_19kOC.png.bf8dee5defda2e97ca9701b14ce2debf[1].png](/t5/image/serverpage/image-id/25860i58AA51617A155EA5/image-size/large?v=v2&px=999)