1 Solution
Thanks for the stats mate i really appreciate it. See your temps of 35-38c seem much more reasonable for an idle CPU, anything sub 40c i feel is fair. TBH im still thinking its a Mainboard issue. Anyone with this Asus TUF x670e PLUS WiFi board getting same issues i wonder
My minimum processor state is set to 0%, one of the first things i do in windows is set my Advanced Power options up for gaming. I have HDD to never sleep and display never turns off also. you think it would make a difference?
As far as curve optimization i tried a -30 from BIOS on all cores and it booted but never ran a stress test. i have reverted all settings to normal for now as i thought having an all core undervolt doesn't really fix the high idle temp from stock. kind of want to get to the bottom of this
Hi Team.
From yesterday got also some strange chooke on going at Forza5 or HL_Alyx in VR,
and desktop was not neough good that have safe setup cut-off main power when reach to close upper LVL Temp or PWR better to not make barbecue.
Hard reset log again, and again crash,
first GPU soft DRV of Nvidia core make crashed after that Steam core UI was hang and crash few times.
Get that feeling that MS IT guys make latest update and again they try to takfe control of segment that not should to not have when I decide to have other manufacture in this rule.
not clear state of with one PWR Drivers MB Bus control MS Win or AMD ect my ASrock soft deal with it higher priority, MS thinks that they do it better when rthey sing green paper directives regulations fail Economic Distribuon Electronic devices to sell them on market with new sticker A+++ f...n ending story of magic economy line that save our planet - really who belive in this sh...t. put your finger in to AC socket and check if is safe.
Getting more redfined setup at BIOS again make more FAN's dynamic reaction earlier on temp try to jump so get no delay in droping peaks on some strange needs of OS - what for not doing OS take almost full load on 16 core of CPU make stable work go bounce - taking overload mahine wichout my permision to get values points as for handle own powering BUS rule as i predict on unknown process - kill some bushy loaded ones like
new "DEV Home" that appear just like that, i din't ask such one to on my system.
Who and Why put it to my OS wichout my approvall - way of gettin in like infecting malware bugs.
So point guilt as to be update for x64 processors package 20H2 few days ago - some thing like black hole - not sean & nothing known good about it but we know hidden do nothing special like free space blocking. .
Get fixed stability and CPU load drop down rapidly, CPU and GPU temps are now even lower than before but is only that I redefine react graph points at dynamic set FANs RPMs via Temp relations to go earlier colling as in profile was.
Get faster fan spin with +400rpm on standard values with same temp -5deg. from basic profile.
Maybe some one get use of it - in my case works with harmfull soft MS get off my system hidden tasks go out now permanently in best way hard way.
**bleep** how i do not like those MS IT do some thing in way of make other users go no way to do some repair thier bad way to do any thing in any bad way of anything.
MS Help desk service is for IT MS team not for users help to go on.
Take reverse undestanding U help solving issues IT MS team on service help desk site wroted - ar we now clear what is for Helpdesk MS web --- YEP real solution for profit cash at not their work distribution.
Luca what motherboard are you using?
Also my wattage sits on about 30W on idle if that helps.
Since originally posting the idle temps have dropped to 44c and sometimes as low as 41c
Alot of it depends on ambient air temperature also. Example, If you are a cold bunny and keep it @75F in your house, your idle and load temps are going to be higher. The fans are pulling that air also to cool the system and through the radiator on your AIO. Would work the same with a custom loop also. But you will always get better cooling UNDER LOADS with a custom loop because the blocks / pumps are just better. You could stick a couple radiators in a bucket of ice and watch temps drop or I have seen someone build a bracket for a MO-RA3 and hang it out the window and extreme benchmark with his temps because of the gains.
I am running a 7800x3d and 7900xtx. I idle @40C CPU and 25C GPU and it is 69F in the house and 40F outside (Littleton, CO). After running a quick Superposition benchmark, no OC, CPU 63C, and GPU 39C. Now that EK 7900xtx block is the most badass on the planet. No matter what I do I have a hard time to get it to 50C, on a custom loop. Just as reference. To me these are the little things that separates the 10C everyone is looking for. And now you can de-lid the 7000 series to gain a little more on the CPU side.
1. Custom loop will always get better cooling.
2. Ambient air makes a pretty big difference.
3. Remember, we are always talking about 10C difference. Everyone is always fighting and worried over 10C and as long as you are within the manufacturer's specs under full loads, who cares, don't worry, it will be ok.
4. I tried to put a few ideas in here for anyone to try. I especially like the MO-RA hangar outside the window. You could gain -20C!!!
And What U think about build PC with liquid AC Oil aquarium - oil is used in transformation AC/AC power stations for keeping coils cold in stress consumption and not make fireworks before new year.
They call it "bucket trash" transform unusually, larges ones is as mini bunker.
Get all base hardware Inside of PC with off all neded sockets and connections cables ect on glands with IP67 make external wayout from batch, for sure need some few Litres this Oil (guess min.3L+Coller.Fan.AIO)
Such oil is not cheap one, so those some small needs as 3 litters might cost even half typical AIO cooling sets.
But only this one liquid is all parameters needed (term take/drop also fully electrical isolating with low viscosity when needed when we atach cooler pump & extr. alu cooler
also in one time very good lubrication on all parts - I haven't yet see at AIO cheap market designed good, bad cheap design water turbine bearings from s..t and not effective lubrication few spins closed AIO go die very fast if we not make in time corrections of noise pump.
Set - get dead in half, maybe one year from 1st Use but we can go in claim defect trip -
but feedback by manufact. serv AIO go gets like this:
"Main defect part was by bad usage of product by user/customer - not according instr. manual,
in effect product go unsealed with drop off some cooling liquid, as Low on lev go make w.pump dry spin work what in next steps stops overheated turbine pump without lubrication instead as in liquid state.
Defect cannot be repaired as free of charge warranty regulation, damage done by customer of wrong handling product & will be fully pay charged for replace new pump, analysis and service all steps claim."
Warranty notes we can stick in the end of haircut back - deep low Panties Area 51 street.
So I get on mind if my pump finally get on last spinning run I will make a SubRyzen Version in aquarium of transparent oil in all of motherboard hardware as possible
ex. web results .
Need to desing logicall and practical assembling parts to not make everytime dry of board if like to connect some flash or other device to PC and need to go dive with my device to deep oil filled batch box , need to made it modullar any possible way of needed connection to MB as outside dry port ready made -
Any one try kind of this way design - termo issue's in PC's ??? (find some clips on YT from even 9 years old)
Be Cool ---> HOT <---- Or Hell Red Burn
Till Next Text.
B
