My windows 10 has stopped working after the lastest version of adrenaline was installed. Even worse, I tried to load off the Win10 USB stick I used to build it a month or two ago and hat won't even load properly. I've reflashed the BIOS, reset the CMOS jumpers and generally done the obvious stuff.
When I try and boot the Win10 USB (or from the SSD) I think it's failing and then booting from the SSD. When the SSD tries to start I get this strange screen. It'll go pale blue then the strange characters appear 1 by 1. Then finally the QR code and a few seconds later a reboot.
Have run memtest and discovered one of my memory modules has errors. Have removed that but the problem persists. This probably explains the occasional reboot I was getting. I'm going to leave memtest running on the other module for a few hours just to be sure.
boot image
Hardware:
CPU : AMD Ryzen 3400G
M/B : ASUS strix m-itx gaming I
Mem : G.SKill Trident Neo F4-3600C16D 2 x 16GB
SSD : Samsung 970 Evo plus nvme
HDD : 2 x WD RED 3TB
Cooler : Cooler Master ML120R AIO
GPU : Not used (just a desktop no gaming)
Power Supply : Phanteks 1200w
Any help would be greatly appreciated.
Matt.
