Selam arkadaşlar.
144hz 1ms 2 adet monitör kullanmaktayım.
Biri AOC biri VİEWSONİC MARKA.
Escape From Tarkov oyununda 2 monitörü birlikte kullandığım zaman 10 fps alıyorum.
AOC --> DP Kablo
VİEWSONİC--> HDMI Kablo
HDMI kabloyu çektiğim zaman fps 120 oluyor.
Yardımlarınızı bekliyorum.
Ekran kartım:
rx 580 4gb
işlemci r5 2600
ram 16gb (8*2)
b450m anakart
i have dual monitör. 2x 144hz 1ms
1 connect dp cable
1connect hdmi cable.
2 monitör connected escape from tarkov in game fps drop (5-10 min good playing 120 fps but 10 min later everytime 10fps)
hdmi cable disconnected (1 monitör playing) no problem. everytime good playing game.
i need help guys.
Thank you.
You are probably having a driver problem. A friend of mine with similar problems was also geting a very similar problem. TV is connecting to a HDMI port and sometimes gets a green screen. I recommend trying an old driver. If you get improvement, it would be correct to report this problem to AMD for new drivers.
https://www.amd.com/tr/support/contact-email-form
You can report the problem in English using this link. You can also try an older driver package using the link below.
https://www.amd.com/en/support/kb/release-notes/rn-rad-win-18-3-4
Download and run DDU before installing the driver package above. Uninstall the drivers using safe mode and install using normal mode.
This is an English language forum only, please edit your post and change it to English or it will be removed from the forum, thank you.
You are probably having a driver problem. A friend of mine with similar problems was also geting a very similar problem. TV is connecting to a HDMI port and sometimes gets a green screen. I recommend trying an old driver. If you get improvement, it would be correct to report this problem to AMD for new drivers.
https://www.amd.com/tr/support/contact-email-form
You can report the problem in English using this link. You can also try an older driver package using the link below.
https://www.amd.com/en/support/kb/release-notes/rn-rad-win-18-3-4
Download and run DDU before installing the driver package above. Uninstall the drivers using safe mode and install using normal mode.
Please edit your post as this is an English language only forum, you can use Google translate if required.