The last month or so I’ve noticed I seem to be getting really inconsistent frame rates/stutters in games with my 6700xt. For example if I leave it uncapped in valorant it jumps around from 500 to 600 fps but if I cap it to anything there’s drops and it can’t hold a consistent frame rate even as low as 100. I’ve set a min frequency I’ve reinstalled all drivers and windows, rolled back drivers, restored everything to factory settings and nothing has helped. It’s especially noticeable if there’s a lot of movement on screen. My specs are:
6700xt
5600x
16gb 3600mhz ram (trident)
asus x570 prime p mobo
ssd drives
hope someone can help im completely out of ideas.
Has it been stuttery for the entire time you had the PC or is it a recent development? Did you change anything around the same time it started, install drivers etc?
Thanks for the reply, It’s been a recent ish development I hadn’t really changed anything and I’ve done a fresh install of windows. It might be due to high dpc latency which I found in latencymon I’ve managed to eliminate all the dpc latency I had by uninstalling all drivers but I’m unsure which previous driver to install as I’ve already tried 4 different ones.
Many people started having issues after 22.11.2 so I would start there.
Did you use DDU?
Yeah I’ve used DDU every time I’ll try the version you said now and see how it goes, thanks again.
Just installed to that version tried altering all in game settings and still getting stutters unfortunately at capped and uncapped frame rates.
Does your GPU have more than one 8 pin connector? If so you should make sure it is using two separate cables and not the one cable to power both connectors.
It was connected with one I swapped it to two and retried but no improvement, then tried an even earlier driver but still no progress
Are your chipset drivers up to date? I'm just guessing at this point to be honest.
hello guys i have the same issue!!my gpu just run low fps for a lil bit and then back to normal !! or stutters specialy at valorant! msi x570 gaming plus amd 5600x psu corsair tx750 sapphire 6700xt !!btw my psu is old but still working well!! i enable SAM and PBO from bios! clean uninstall from ddu and install drivers again but still stutters!i try almost everything but nothing happens!!im very sad my card is only 5 days old!! should i change psu?should i sell this card again ?
What drivers are you using?
hey bro !! 23.9.2 !the new one !!im out of ideas too! i try almost everything !!with my 3060 i have no problem !!i upgrade to 6700xt for better and now here i am!
If this were my case, I would first disable Windows ability to update the drivers. Windows drivers have been broken for a while now. Solved: How to stop updates for drivers with Windows Updat... - AMD Community
Next I would use DDU to remove all display drivers, you may need to run it twice since you previously had an Nvidia GPU. After restarting my system I would then install the last working drivers from https://www.amd.com/en/support
You can view previous drivers here https://www.amd.com/en/support/previous-drivers/graphics/amd-radeon-6000-series/amd-radeon-6700-seri...
Please report your findings using the Adrenalin bug report tool or use this link https://www.amd.com/en/forms/contact-us/support.html
Are you using individual power cables to power the GPU or are they just multiple connectors on one cable? This can lead to poor performance on some GPUs.
individual!and i use lian li strips at the end!
Are you using a riser cable?
no no !!1 only led strips!!
Okay. Have you tried turning off MPO?
Goodmorning!no i didnt!!ehen i go back home after work i try to disable that!!but i dont think this cause poor performance!
i tried mpo off i think its better!!i do it at registry create overlay for win x32 i give 00000005 then i save and now i try it!!at the end of the month i will change psu and see what happened!!
with MPO enable things are worst!!
To re-enable MPO delete the registry file you created. https://www.reddit.com/r/Amd/comments/yvyqc7/disabling_multiplane_overlay_mpo_fixed_all/?rdt=54273
You can find the MPO registry files here.
Okay, at this point I am out of troubleshooting ideas. Maybe check out our Discord and try to get faster replies there. https://discord.gg/YPjN9HAhnS
i run benchmark yesterday and i realize that many times diagram goes to 0 !that means propably that the psu maybe retired!!when diagram goes 0 that means at this point i get stutter/lag etc!
finally im full of fps but still stuttering!!nothing help me!