cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

PC Graphics

artson
Journeyman III
‎09-28-2020 12:07 PM

Radeon RX 5500 XT in remote with monitor switched off

I have an Asus TUF X570 with a Radeon RX 5500 XT.(Gygabite).

I want to conect to my computer from remote desktop.

If I connect from remote, and my monitor is switched off, there are some screens wich will not be "processed" from the graphic card, and thus are not actulized in my remote.

I've tried with Chrome remote and Teamviewer and without the "hardware acceleration". It is not a matter of the remote program.

It is only a problem when the monitor is switched off or the HDMI cable is unplugged.

How could I solve it?

Is there a way of making the graphic car work without a "recognised connected" monitor?

Thanks!

3 Replies
pokester
MVP
‎09-28-2020 03:13 PM

Try anydesk, I connect to several servers without monitors with no issue at all. See if that helps. Although I have no idea if I am doing what you are trying to do remotely. 

0 Likes
artson
In response to pokester
Journeyman III
‎09-28-2020 03:18 PM

It seems this "anydesk" is another software to connect remotely.

It should have the same issues as with tho other programms, but the problem here is with the GPU.

I'll try with some dummy (virtual) HDMI, which I should connect to the GPU and so tell it as I would be using a monitor.

Thanks anyway!

AkiraLeir
Journeyman III
‎07-30-2022 09:59 AM

Same here, however there was no such problem when I used a DVI-D (or D-SUB, for that matter) cable, so this issue is particular to HDMI connections. I don't have a DVI-D-capable monitor anymore and I haven't seen a D-SUB cable in years, so I hope this can be solved without needing to buy additional stuff.

0 Likes