Hello,
Im facing a problem with my Sapphire rx6900xt toxic LE. The pump is dying. It make a crazy noise like an old hard drive who's gonna break. (It's not bubble/air noise)
Ofc my gpu is now out of warranty and i tried to reach Sapphire and asetek(pump manufacturer) to buy spare parts but they dont.
Asetek told me there are no compatibility with aio for CPU.
So what is the solution ? Anyone already face that problem ?
Thank you
Jus an idea, as you can see in this video:
AMD Sapphire Radeon 6900XT Toxic Rad Edition LE Tear Down - Part 1 - YouTube
The pump mounting frame is asetek standard. It is compatible with any asetek like pump.
You could try to find an REV.1 Arctic Liquid Freezer 360, remove the pump cover and mount it with the original frame on your GPU. After removing the pump cover i'm pretty shure it will fit. The cover can be removed very easily.
An older NZXT with the round pump should also work. But i'm not shure how to remove the cover on this brand, i never had one.
This GPU AIO Cooler by AlphaCool is compatible with your Sapphire GPU Card: https://www.aquatuning.us/water-cooling/gpu-water-blocks/gpu-full-cover/eisblock-gpx/29700/alphacool...
They also sell pumps that might fit or replace current Sapphire Astek Pump. Need to contact Alphacool Support to see if it is compatible with the Sapphire pump.
thanks for the answer guys !!
The problem with the artic is that the tubes come from the top of the pump block and not the side.
I've seen the waterblock but i want to avoid this solution if possible and get aio for cpu which can fit on the Toxic LE.
i'm gonna look for the nzxt solution as well. It help but not sure of if it will work
thanks
The GPU Chip cooler shown from Arcticcooler shows the tubing coming out from the sides:
Unless I misunderstood when you mentioned the arctic tubes comes out from the top.
I will look into this solution in last resort.. im trying to get an answer from Sapphire concerning compatibility with a classic aio for CPU.
Hi..do u find the compatible aio for ur gpu...please help...my pump is dead already
I used the alphacool nexos it's a pump for GPU. It's hard to instal but it's working !!
Hi. Thanks but at my region alphacool is not available in any shop so i decided to go with nzxt kraken x63 with extra copperplate 1.5mm thick and its working too...there is still a bit of gap between pump base n gpu b4 i installed with an extra copperplate.
could you please describe nd share photo s how you actually fit a NZXT kraken x63 inside a Sapphire Toxic card ?
And what is the extra copperplate your talking about, care to give more info on that ?