cancel
Showing results for 
Search instead for 
Did you mean: 

PC Graphics

prinzzera
Journeyman III

FirePro S10000 in ESXi Freeze while passthrough

Hi, everyone I've a FirePro S10000 in an ESXi Server. I want to Passthrough GPU1 to VM1 and GPU2 to VM2. If i boot VM1 or VM2 separate (without the other VM) it works well (Benchmark - tested). But if i boot them together and make a test both of them freeze. Only a restart of the host will make the GPU work again. What have i done wrong?

What i've done:

- Tried several ESXi Versions (5.5 ;6.0; 6.5; 6.7)

- Complete reinstall of all VM's

- Bought a new PSU (1650W) Do you know what i have done Wrong?

Is it eventually possible to use VSGA instead of VDGA?

I did not find any Driver for the S10000 in ESXi, is anyone with that driver out there?

Kind Regard

0 Likes
1 Solution
prinzzera
Journeyman III

I changed the Mainboard to another one and some settings in the Guest (disconnect Device on Shutdown/Connect device on startup) then the problem was away.

View solution in original post

0 Likes
1 Reply
prinzzera
Journeyman III

I changed the Mainboard to another one and some settings in the Guest (disconnect Device on Shutdown/Connect device on startup) then the problem was away.

0 Likes