cancel
Showing results for 
Search instead for 
Did you mean: 

PC Graphics

chenpw
Journeyman III

AMD S7150 + KVM MvGPU issue

AMD Graphic device:S7150

kvm gim driver: 

https://github.com/GPUOpen-LibrariesAndSDKs/MxGPU-Virtualization

CentOS-7-x86_64-1810:

lscpci output as follows after kvm gim driver installed: 

lspci | grep -i amd
86:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tonga XT GL [FirePro S7150]
86:02.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tonga XTV GL [FirePro S7150V]
86:02.1 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tonga XTV GL [FirePro S7150V]
86:02.2 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tonga XTV GL [FirePro S7150V]
86:02.3 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tonga XTV GL [FirePro S7150V]
86:02.4 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tonga XTV GL [FirePro S7150V]
86:02.5 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tonga XTV GL [FirePro S7150V]
86:02.6 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tonga XTV GL [FirePro S7150V]
86:02.7 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tonga XTV GL [FirePro S7150V]
86:03.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tonga XTV GL [FirePro S7150V]
86:03.1 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tonga XTV GL [FirePro S7150V]
86:03.2 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tonga XTV GL [FirePro S7150V]
86:03.3 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tonga XTV GL [FirePro S7150V]

After assign one of sub Graphic Adapter to windows 10 64-bit guest (1809)

and install guest driver as bellow:

Radeon™ Pro Software Adrenalin Edition for Windows® 10 (64-bit)

https://www.amd.com/zh-hans/support/professional-graphics/firepro/firepro-s-series/firepro-s7150-pas... 

Everything is seem like OK when I Connected guest OS by  RDP and use dxdiag command to check MxGPU status .

BUT,  guest run so slowly ,and I found that csrss and dwm proccess  use almost 100% GPU.

Further more,I have Tested win7-64 guest , and found that D3D is invalude although AMD MxGPU driver seem work.

anyone help?

0 Likes
2 Replies
progmalover
Journeyman III

The same question...my host server is centos and hypervisor run with win7-64, i guess that maybe it need special libvirt xml  ?

0 Likes

After a deeply dig...i found maybe the issue is on rdp, there is no rdp display device on win7 and win10 is on reverse situation.

0 Likes