- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
VR bad GPU utilization
Hi. All VR games are not using GPU . Basically 7800 XT GPU usage sits at around 50-60% and MHz drops to 1400MHz , periodically performance goes up and drops down again . I have to reduce resolution drastically to be able to play and even then everything stutters . It's like playing in Power saving mode. Something is very broken in VR . In regular games GPU usage is good and can reach 100%, no problems there only VR. Performance is worse than on my old 2070super. Please solved this 🙂 🙂
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi, whats the CPU you are running on? if it's a bottleneck, even though you got a high-end GPU, the CPU could be completely holding you back. Same goes to a Memory bottleneck, If your application you are using requires a large amount of memory bandwidth.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
My CPu 5800x3d and I have 32gb o ram . I found what is the problem . It's motion interpolation. If i turn off the problem goes away and I do extra steps this way It's super smooth but I'm no longer can use fake frames. Here's what i did.
1 turn off motion interpolation
2 download and install RivaTuner Statistics server
3 limit your fps via Rivatuner to 45 or 90 if your pc can run 90fps ( check your supported refresh rates and limit to that, it may be different 30 or 60)
4 turn ON in Rivatuner Scanline sync , should be -1
5 Very important turn off Vsync in all games.
Vr headset is Hp reverb g2
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
All right, that's great to know. Thanks
