Requires activation with a key that I don't have....Any ideas?
This is day 1 of my new Ryzen 2600x with my Asus x470 motherboard. Everything got up and running fine. Set up my SDD + HDD in StoreMI. Installed a bunch of apps. Then updated BIOS and lost that drive and StoreMI now opens, says I have no FuzeDrives and tells me my license check failed.
Solved! Go to Solution.
For anyone running into this issue.
I had to:
1) Uninstall StoreMI
2) Follow these steps: http://triplescomputers.com/blog/uncategorized/solution-switch-windows-10-from-raidide-to-ahci-opera...
3) Reinstall StoreMI
My Tiered drive returned and was good to go.
Well, now I tried just uninstalling and reinstalling. Now I get this error:
ERROR [1603]: The StoreMI AHCI driver could not be installed. No supported AHCI controller is detected (or it is set to RAID or IDE mode). StoreMI install aborted.
I checked my BIOS. It is in AHCI mode.
It seems whatever is going on, my BIOS update messed everything up. Severely disappointed right now.
For anyone running into this issue.
I had to:
1) Uninstall StoreMI
2) Follow these steps: http://triplescomputers.com/blog/uncategorized/solution-switch-windows-10-from-raidide-to-ahci-opera...
3) Reinstall StoreMI
My Tiered drive returned and was good to go.
hello! if I follow your steps, can I regain my former data in the tied disk?
Thanks for the followup - I'm having this same issue as of a couple days ago, despite not updating BIOS or anything except automatic windows updates. Unfortunately I've made my StoreMI setup a boot drive which was a mistake, so looks like the only way to uninstall/reinstall would be to totally wipe Windows and everything else clean from my system :/