Hello everyone! I bought SSD SFYRD 2tb Kingston fury renegate on 08/26/2024 for a new Lenovo thinkbook G16+ AHP laptop, Rayzen 8845H, 32Gb DDR5, SSD 1TB, there is a second slot for SSD, it was planned to use it for data as an auxiliary one. A copper radiator was glued to the disk and installed in the laptop, but after a while it falls off, freezes, does not pass write tests in crystalmark, and shows unrealistic numbers for read speed, also does not enter the proprietary Kingston ssd manager utility, I entered it once and that's it. I handed it over under warranty, they checked everything supposedly well. I picked it up, nothing had changed, the firmware was 31.6, I wanted to flash the proprietary KSM utility to 31.7, but I could not run the utility. I returned it, made all the screenshots and records, yesterday they replaced it with a new one, firmware 31.7 out of the box, but nothing has changed, everything is the same. I changed it between slots, it did not help, I installed a second Hynix SSD, everything worked in the second slot. Today I installed 1 TB Samsung 980, everything works fine, the problem is only with the purchased SSD SFYRD 2tb Kingston Fury Renegate, possibly a defective batch. I would never have thought that there could be problems with this brand. I updated the laptop to the latest BIOS NLCN33WW, it did not help! By the way, I noticed one pleasant nuance when I bought it, the native Umis on 1TB, showed a result of 3500 MB / s, after updating the BIOS to BIOS version NLCN31WW, it began to show about 7000 MB / s, now I updated it again to NLCN33WW, nothing helped. Maybe there are some thoughts, the disk, by the way, is made in China.
