First things first: Sorry, but english is not my first language!!
Anyway...
I have a "RX580 NITRO+" and after I play a game, the FAN's rotations remains close to 100%, even GPU TEMP lower the 50C.
This just happens after the GPU be required, forced ( GAMES for exemple).
bellow You can see: temp 40C || RMP 2870 >> (RPM should be ZERO)
RPM just go ZERO if I change any settings in Wattman config.
I hope be understood! But Anybody can help me?
Message was edited by: Matt B
We have updated the title of this discussion with relevant details to better describe your issue.
Your problem is your settings. They are totally out of whack. Use the "Restore Factory Defaults" to revert all the changes you made...or reinstall the drivers using a clean install. Please adjust your Temp as shown below (manual > 75c Target > 45c) and the Power Limit as shown. Click "Apply" at top of page. Do Not Change Any Other Setting.
I have the exact same problem showed in that post https://community.amd.com/message/2799996#comment-2799996
I already try a clean instalation (with DDU + CCleaner for registrer)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
The problem is:
Every time I change "TEMPERATURE SETTINGS" and "APLLY", the "FAN" changes itself to MANUAL with thats values (576 >>2280). If I back the FAN to automatic and APLLY, "TEMPERATURES" changes itself as shown below:
My model have DUAL BIOS, the problem occures with both and I tested with other drivers versions already.
If I put settings in default (even just "restore to default"), after exit a game, the FAN rotation keeps stuck in near 100%
You have no idea what your doing do you..is this a new card for you?
"Destino" Target is the temperature you set to engage the fans.
"Max" is the maximum temperature you want the card to run at under load.
If you set it as I recommend. "Destino" @45c (default) engages your fans when the temp hits 45c and GRADUALLY INCREASES as needed to keep it at/under the "Max" temperature you set.
You are telling the fans to not become involved until the temp reaches 75c and keep the temperature under 65c. Crazy.
You also have not raised the Power Limit...can you translate English? Read this about the Power Limit setting > AMD graphics performance
"Your AMD graphics card has a Power Limit setting in Overdrive. The default setting is 0. That is a power saving (electricity) setting that throttles your card when it begins to draw more power...like when your gaming. Enabling Overdrive and Raising the Power Limit to it's Highest + value (currently +50 or +20 depending on the card) Disables this throttling feature. It is not overclocking, it just allows the card to perform to its maximum capabilities."
IMO, reinstall the AMD drivers using the clean install method > Clean Install AMD Graphics Drivers
Open Wattman and set the temp and power as indicated in the picture. Click 'apply'. Do not touch any other setting. Leave everything else set at default (automatic).
