PC Drivers & Software

[Fummins03]

I have a Ryzen 9 7950x with a asrock x670e steel legend MB, and a 6900xt on windows 11. I run a ultrawide on the 6900xt and another monitor off the mother board graphics. I updated the bios to the latest version now the the drivers for the onboard graphics isn't working. It is using a Microsoft basic Display Driver rather then the AMD Radeon. I tired everything I can think of I get  

Windows has stopped this device because it has reported problems. (Code 43)

I have tired to update drivers, uninstall all AMD software, used DDU reinstalled everything, tired the Auto driver installer, tried different bios versions.

Nothing seams to work any ideas?

Everything worked fine prior to the bios update

Thanks for your help

[johnnyenglish]

Why would you want to run the secondary display from the iGPU? Why not use the the main card instead?

Anyway, check if the bios update didn't disabled the iGPU in any way. Reset bios to defaults and once on windows remove the iGPU driver from device manager.

Scan for hardware changes and reboot. 

This should work. I have not disabled my iGPU but last time I had a code 43 was due to a windows update.

Did this and it worked. 

[elstaci]

What does Windows Settings - Display show? It should show to Monitors (IGPU and GPU Card)

What does Device Manager show? Try updating the driver via Device Manager and see if it installs the AMD driver.

The latest AMD Driver for the 7950X IGPU is compatible with the 6000 Series GPU cards so it should install both the IGPU and GPU drivers.