Showing results for 
Search instead for 
Did you mean: 

Graphics Cards

Journeyman III

Black screen on installation, 6700 XT, please help :(

As you can tell by the title, bought a Gigabyte RX 6700 XT OC today plugged it all in and there is no signal to my monitor. Just upgraded from a 1060 (6GB) so I really wanna get this sorted out without having to wait a few months for a replacement as this is my last upgrade in my pc. I've tried using different cables, monitors updating bios, forcing PCIE to gen 3 but none of it has worked.

My specs are:
Gigabyte RX 6700 XT OC
Z390-A pro
RM 850w power supply

To my surprise plugged it into another Computer with similar specs but instead running a I9-9900k with a Rog Strix Z390-E gaming motherboard, previously using a 1080 Ti and it worked fine.
So in short I'm kind of lost on what else I can do to fix this, any help is appreciated.

2 Replies
Adept II

run a Memtest86 if u can go in the bios to check the ram if is ok  check the motherboard error lighting and clear cmos

last update or downgrade the bios on the motherboard

Journeyman III

If 3 long beeps are heard, remove all memory modules and try to install only one memory module in the DIMMA2 slot
first and then restart the computer. y If 1 long 2 short beeps are heard, remove and reinstall the graphics card and then restart the computer.
Test with another known working graphics card. You mentioned you had a 1080 TI, your motherboard has on board video if your CPU has on board video, did you try that to make sure you can at least boot to BIOS?