cancel
Showing results for 
Search instead for 
Did you mean: 

Graphics Cards

breadmon
Journeyman III

7600 XT white LED Lights on card are always on

PXL_20240528_175913530.jpg
As shown the white LEDs on my graphics card always stay on. Everything runs fine though. I can still play my games, with no over heating or anything. They're just bright and distracting. Also I'd like to confirm that nothing is wrong with my card.

I've checked and rechecked the power cables to and from the PSU.
The PSU is a Corsair RM750e, 750W.
I've turned it on and off multiple times. this has been happening for a week.

I only have two monitors plugged in. 1440p 144hz for gaming and a 1080 dell for side stuff.

0 Likes
4 Replies
cpurpe91
Volunteer Moderator

On my card the LEDs mean it is having power troubles. Mine never stayed on though. They would flash at boot and shutdown.

Ryzen 7 7700X, MSI MAG X670E Tomahawk Wifi, Corsair DOMINATOR® TITANIUM RGB 2x16GB DDR5 DRAM 6000MT/s CL30, AMD Radeon RX 7900 XT, Corsair HX Series™ HX1000, Corsair MP600 PRO NH 4TB
0 Likes
FunkZ
Exemplar

I suggest you open a Gigabyte eSupport ticket for your card to determine if this is normal operation or if this LED behavior indicates a fault.

Ryzen R7 5700X | B550 Gaming X | 2x16GB G.Skill 3600 | Radeon RX 7900XT
cpurpe91
Volunteer Moderator

I agree with @FunkZ. You should try to see what the manufacturer says about it.

Ryzen 7 7700X, MSI MAG X670E Tomahawk Wifi, Corsair DOMINATOR® TITANIUM RGB 2x16GB DDR5 DRAM 6000MT/s CL30, AMD Radeon RX 7900 XT, Corsair HX Series™ HX1000, Corsair MP600 PRO NH 4TB
0 Likes
riscoloco83
Journeyman III

Had the exact same problem as you i believed it at first to be a power supply issue but after buying a brand new psu the issue remained sent the card back to scan were i purchased it and they replaced it with a new one two weeks later now this card is doing the same thing so not sure weather i should return it again one thing i found that works sometimes to get rid of leds is shut down pc turn of switch for psu at back hold down the power switch on case for couple seconds then turn back on.

0 Likes