ryzen 2700x
gigabyte rx590 (will be rx5700 oc) when issue resolved
gigabyte x470 ultra gaming
27" acer xz271 w/HDMI
after trying to resolve an issue, which has bothered me for months (14), been gathering dust for 4, i had done a fresh install with above setup, all was working perfectly, so decided to connect the monitor again with a DP cable (better FPS/clarity??) while system was on,, used it for 6 hours at least,played games, stress test for 3hrs, brilliant, then thought id check for win10 updates and turn it off
when i briefly seen a win10 message about restating due to AMD USB 3.0 driver then when restarted, and problem is back!!!! .. monitor wont stay connected via DP, stays on for 3 seconds max, go black, then hunts for signal via hdmi etc.. comes back round to dp stays on for 3 secs....repeat steps 1 to3 ... any advice will be appreicated please.
Also,,all hardware now in test bench set up(removed from case) as ive also been chasing a issue where it just turns off as if power has been cut, everytime being pushed hard, thought it was PSU but since taking it out the case its not done it since!! could this have been a loose cable??
Could be your DP cable is a problem. There are some pretty bad cheap cables out there.
The easy solution for now, use HDMI if it is working pending a new better DisplayPort cable.
My LG panel came with a good DP cable which works well at 3840x2160.
Do you see anything display at all as it boots but then disappears once Windows starts loading?
Hard to tell as it boots so quick
Phill White
Either something displays or it doesn't. So watch carefully.
yeah. shows boot screen etc.
then it is a software issue. Either Windows or an issue with the driver install. Download DDU from wagnardsoft_com and run it from safe mode. Then install the GPU driver while disconnected from the internet.