In the last releases of drivers, missing resolutions when VSR activated: missing 1920x1080 and 1920x1200. My resolution is 1600x900.
AMD Phenom II X4 925
8 Gb RAM
Gigabyte R9 270X 2 Gb
Windows 7 Ultimate (64-bit) SP1
Solved! Go to Solution.
Supported VSR modes are dependent on the target display's native timing (resolution, refresh rate). However, some VSR modes are only available on certain AMD GPUs. Please refer to the table below for supported VSR modes.
|Target Display Timing||Supported VSR Modes|
|1366 X 768 @ 60HZ||1600 X 900|
1920 X 1080
|1600 X 900 @ 60HZ||1920 X 1080|
|1920 X 1080 @ 60HZ||2560 X 1440|
3200 X 1800
3840 X 2160 (AMD Radeon™ R9 285, AMD Radeon™ R9 380 and AMD Radeon™ R9 Fury Series)
|1920 X 1200 @ 60HZ||2048 X 1536|
2560 X 1600
3840 X 2400 (AMD Radeon™ R9 285, AMD Radeon™ R9 380 and AMD Radeon™ R9 Fury Series)
|2560 X 1440 @ 60HZ||3200 X 1800|
|1920 X 1080 @ 120HZ||1920 X 1200 @ 120HZ|
2048 X 1536 @ 120HZ
I know that, but after activating VSR enabling only 1600x1200, higher variants of resolution is missing. Bug in the last few version of drivers, on 18.2.1 all works normal.
What do you mean "enabling only 1600x1200" ? You said your native resolution is 1600x900. If that is so...VSR mode is 1920x1080....does it not show that as available? Do you have display scaling enabled?
I did that and it still didn't work, until....i disabled GPU scaling. For some reason GPU scaling disables a set of resolutions. Not sure why that is. Before the resolutions showed up with GPU scaling enabled. LOL. Go figure.