Drivers & Software

[TumKo]

The new driver translates the post code of my motherboard asus x570 e gaming into D3 inside the system, the computer boots into the AA post, but as soon as I go into the driver settings, the post becomes D3 post code says about (some of the architectural protocols are not available) I don't know what it is, but I don't like it and I went back to the previous version and everything is fine, most likely an error due to the new temperature monitoring interface, the BIOS blocks access and error D3 appears)

[elstaci]

These two Users has the exact same Error Code on his Gigabyte Motherboard: https://community.amd.com/t5/drivers-software/gigabyte-master-x570-d3-error-code-with-new-21-4-1-dri...

The only thing I can see it might be some sort of BIOS issue in conflict with the new driver.

[TumKo]

I also think so that the conflict of the BIOS with the new driver I have the last BIOS AGESA patch A,No other errors were noticed only D3, graphics card rog 5700xt

[kodo28]

Same issue here with my Aorus X570 Xtreme.

On fresh windows install with all app installations that I use no issue with code d3.

Soon as, I installed the Radeon Software Adrenalin 21.4.1, it raised code d3 after some minutes of windows start. 

[TumKo]

Yes, if you do not go into the driver settings, the D3 code will appear in a few minutes, and if you immediately after loading the OS Go to settings the code D3 will appear immediately)

[kodo28]

right it was like that I've found that the app was the issue. I thought first that I had a problem with my ram due less info about d3 code on web.  For now, I just installed older version and no d3 code anymore 

[elstaci]

 I see other Users at Reddit has the same exact issue with the D3 error code: https://www.reddit.com/r/AMDHelp/comments/mvlxyj/latest_drivers_cause_d3_qcode_error/

[TumKo]

I installed version 21.3.2 all ok, I also tried to install the driver with complete uninstallation using safe mode DDU utility still code D3, ‌‌"about it" "some of the architectural protocols are not available" which I don’t know, I am staying on 21.3.2 it is stable and does not cause any problems‌‌‌‌

PS I'm sorry for my English, I'm from Russia)

[Ki_wi_]

I am having the same problem and I'm sure this will be fixed when we have a new driver update soon. Glad I'm not the only one. I will revert back to the previous driver also. 

Cheers.

[Ki_wi_]

Yes, I'm having the same problem. I will revert back to previous version in the mean time.

Cheers.