cancel
Showing results for 
Search instead for 
Did you mean: 

Drivers & Software

Anonymous
Not applicable

20.1.4 Complete Mess

It's yet another Complete Mess guide.

HDMI Scaling locks to 30FPS (At least you have acknowledged the bug as listed in the driver Known Issues)

Power Efficiency feature missing from the VII and XT range. (You removed the feature from the 20.x.x driver)

Black screen of death on idle (Powerplay issue, Activating 'Anti-Lag')

3D applications utilizing 300mhz core, results in either a crash or stuttering (Phantom Lag, Powerplay issue)

Core spikes over 2500+mhz in 3D applications.

Driver GUI crashes out can corrupt the AMD driver installation results in BSOD.

Wattmann is corrupt. Still unstable after all these years.

DPM0 State for the VII is 43mhz which is far too low, results in GUI lag. (Previous driver was 25mhz)

Edited Px states take no effect with wattman or Afterburner, its still a P0 lock at 800mhz.

OC settings just seem to reset and deletes all my profiles when I'm online?

Weird IP addresses blocked from the driver? Why is my GPU driver sending inbound/outbound requests?

No games play solid 60FPS because of your stupid downclocking powerplay crap.

FRTC is missing from the GUI panel. This is required for DX applications with no vsync or framecap option. (Chill with DX9 is buggy, has no effect)

No fixes after a month? What's going off here AMD?

17 Replies

I have abandoned 20.1.4 and went back to 19.12.2 to get around all the BSOD crashing.

0 Likes

Reports on reddit point to MASSIVE ReLive Memory Leak.

Vulkan CRASHES when using dxvk or reshade, possibly crashes under normal modes too.

Dx9 performance is garbage, dxvk gives you extra 40+ FPS in Dx9 games, but vulkan crashes.

I copied 20.1.3 vulkan dll into game folder, dxvk works, but loads slower.

20.1.4 may possibly fix constant black screens on Vega 56. Haven't tried 20.1.3, but earlier versions were broken for sure.

20.1.4 has "now playing" / "current session" bug, still thinks game is running after exit. This may be related to ReLive memory leak, as ReLive could be infinitely recording nothing.

Haven't tested ReLive in borderless window, but it hasn't worked for previous 20 drivers, probably still broken.

ProTip to raytracing fans, there now is a reshade PTGI shader out there. Don't count on AMD ever sponsoring PTGI native games until next gen consoles and new hardware, which will deliberately ignore last gen cards that support GI and VRS 1.0.

I may revert to 20.1.3 to see if last driver fixes 20.1.4 bugs, but only if black screen is fixed. 20.1.4 is only useful if 20.1.3 still has black screen issues.

0 Likes

can you post a link to the particular post on Reddit that you saw

0 Likes

https://www.reddit.com/r/Amd/comments/evdsex/potential_memory_leak_2014/ 

User claims memory leak is with Instant replay on.

I separately noticed Control Panel still thinks my last played game is still running after exit. If there isn't a "real" memory leak in ReLive, it may actually be that ReLive is stuck recording nothing because it thinks the game is still running. Either way, Relive instant replay should stop eating memory up to the Instant Replay Duration, so it's probably a combination of both features being broken.

Another problem with 20 series:

ReLive, VSR, etc, settings are F-ing HIDDEN under the setting cogwheel, which is really bad UI design. People need access to that, and AMD just randomly decided it was OK to hide important features. The ReLive redesign doesn't provide tab access to OFFLINE recording modes, which doesn't matter since I can't get the damn thing to work borderless anyway, since it always fails to detect a game running. Won't even work with record desktop on. Pretty much makes OBS the only real recording option.

0 Likes

turn off instant replay, it is well known to be broken

0 Likes
Anonymous
Not applicable

The only improvement for us is the DPM0 state on 20.1.4 is 40mhz, the older versions were 25mhz, its simply too low for GUI navigation, it lags.

Still major issues, cannot use the unit without the VII blacking out from this utter garbage powerplay.

Do they not understand that HBM cannot have powerplay otherwise its unstable.

I'm trying my best here to get the feature re-implemented.

They fixed it with the FuryX, just have to prey they do the same with the VII.

0 Likes

john007, try plugging in a second monitor, manual overclocking, or running 144hz, because AMD power saving completely fails when you do that. AMD claims this is a "requirement" to handle dual monitors or high refresh rate, but I know this is a LIE, since it worked fine under CCC (really old .NET control panel), PLUS it works fine when manually underclocking, so the "requirement" is merely an excuse for multi-monitor bugging out powersaving. Manual Overclocking can also bug out powersaving under certain circumstances. You could also try using clock blocker, which is not a videocard specific tool. I think there also was some glitch where you could run a video player in the background to reduce low power modes.

Worst case, sell the VII, buy Nvidia. The VII probably isn't on any priority list for fixes due to it's low production volume.

0 Likes

john007 wrote:

The only improvement for us is the DPM0 state on 20.1.4 is 40mhz, the older versions were 25mhz, its simply too low for GUI navigation, it lags.

 

Still major issues, cannot use the unit without the VII blacking out from this utter garbage powerplay.

 

Do they not understand that HBM cannot have powerplay otherwise its unstable.

 

I'm trying my best here to get the feature re-implemented.

 

They fixed it with the FuryX, just have to prey they do the same with the VII.

according to MSI Afterburner my RX 480 at idle is 300 MHz as is my GDDR5. 

0 Likes
Anonymous
Not applicable

Just had a screenshot sent from AMD with the VII DPM0 state at 25mhz so its not an issue on my side.

Older GPU's have a much higher P0 state, like you said 300mhz, the FuryX was 400mhz.

0 Likes

john007 wrote:

Just had a screenshot sent from AMD with the VII DPM0 state at 25mhz so its not an issue on my side.

 

Older GPU's have a much higher P0 state, like you said 300mhz, the FuryX was 400mhz.

Given the Radeon VII is Vega CU based it should clock the same as my CPU integrated graphics which is also Vega

This is why I am wondering what gives with the 25 Mhz idle clock

Now I wonder what the RDNA cards are doing at idle, MSI Afterburner seems to be good at managing a video card's power and monitoring etc

0 Likes
Anonymous
Not applicable

Its the powerplay causing this, utter garbage, we need our Power Efficiency back.

Hopefully they are listening because I see other threads regarding such low GPU usage.

This is why the screen blacks out, powerplay doesn't know what its doing, its constantly downclocking the core/voltage.

john007 wrote:

Its the powerplay causing this, utter garbage, we need our Power Efficiency back.

 

Hopefully they are listening because I see other threads regarding such low GPU usage.

 

This is why the screen blacks out, powerplay doesn't know what its doing, its constantly downclocking the core/voltage.

maybe you should abandon powerplay and use the windows 10 default power management features

0 Likes
Anonymous
Not applicable

You cannot disable Powerplay on the VII.

You would think I would have disabled it by now.

0 Likes

Have you tried disabling ULPS?

ULPS: How to disable 

0 Likes
Anonymous
Not applicable

Thanks for the reply.

Yes indeed that was one of the first edits, I have edited many other values, no luck.

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0000]
"PP_ThermalAutoThrottlingEnable"=dword:00000001
"DisableDrmdmaPowerGating"=dword:00000000
;
; OBVIOUS ULPS OFF IS OBVIOUS (ULPS. Ultra Low Power Saving.)
"EnableUlps"=dword:00000001
"EnableXDSupport"=dword:00000001
;
;>Fixing some Frame buffer correction that is meant to be Disabled as no longer used by AMD especially under Windows 10.;
;>This option only fixes a bug with Windows 10 if your driver didn't set this as it should, - just a preface!;
"DisableFBCForFullScreenApp"="0"
"DisableFBCSupport"=dword:00000000
;
;>StutterMode as Vega default (8204 / 200c hex)
;>This is Stutter Mode Switch, avaible Options are: 0,1,2 - 0 means OFF
"StutterMode"=dword:00000002
;>GPU to Monitor Delay Times in ms, We don't know too much about it but feel free to experiment, Try 15000/7500/5000/3000/2000 or for 1ms LCD 1000)
"PP_MCLKStutterModeThreshold"=dword:00014000
;>
;>
;>
"EnableUvdClockGating"=dword:00000001
;>
;Also disabling ASPM L0s and L1 if your computer uses it it shouldn't now, as that caused idle transition latency
"EnableAspmL0s"=dword:00000000
"EnableAspmL1"=dword:00000000
"PP_GPUPowerDownEnabled"=dword:00000001
"PP_DisableI2COnVR"=dword:00000001
;>
;>Additional tweak for Vega since it is supposed to disable on polaris but doesn't if driver installed on RX Vega / ( and VII cards?? ;Someone confirm if this is already done on Radeon VII.. all powergating EXCEPT VCE for ReLive needs disabling for smooth ;performance.)
;>
"DisableSAMUPowerGating"=dword:00000001
;>
;>
;>Primitive Shader Discard (not fully working, but did something on V56)
"KMD_PrimitiveShaderSupport"=dword:00000000
;>
;>
;>HDMI dropout fix/ Power Saving;
;>
"PP_SclkDeepSleepDisable"=dword:00000001
;>
;>Frame rate limiter. 1 = On, 0 = Off (Default)
"KMD_FRTEnabled"=dword:00000001
;>Frame rate limiter (Max FPS).
"KMD_MaxFrameRateRequested"=dword:0000003d
;>
;Some OpenGL flipping function, best leave it at 1, if you have issues with stutter in OGL try 0.
"DalAllowDPrefSwitchingForGLSync"=dword:00000001
;DMA trigger probably for legacy PC but all these settings worked well for me.
"DalAllowDirectMemoryAccessTrig"=dword:00000001
"DisableBlockWrite"=dword:00000001
"DisableDMACopy"=dword:00000001
;>In CAT you can turn ON/OFF the Texture compresion Format for the Favour of Radeon GPU's, I have ON, something wrong with Textures try OFF ;-)
"SurfaceFormatReplacements_NA"="0"
;
"DVRAnalytics"=dword:00000000
"TFQ_NA"="0"
;>Gives Options in Tray/CAT for more AA options
"AntiAlias_NA"="1"
;>(ability to turn OFF Geometry Instancing, Avaible in Task CAT Icon only!
"GI_NA"="0"
;>Turns On better Aniso Filtering, also more demanding and looks better, Avaible in Task CAT Icon only!
"AreaAnizo_NA"="1"
;>Turns ON more AA Options, Avaible in Task CAT Icon only!
"AAF_NA"="1"
;>Static Gamma for Movies
"StaticGamma_NA"="0"
;>Set Gamma in Movies/Games ?
"Gamma_NA"="0"
;>Enchanced Quality Mode for AA, More demanding, avaible in CAT AA dropdown
"EQAA_NA"="0"
;>ON/OFF Morphological AA in CAT
"MLF_NA"="1"
;>Yet another usefull AA menagment, you can go to 32xAA
"TemporalAAMultiplier_NA"="1"
;Adaptive Sampled Transparent Textures, AA on textures with transparency which did not have proper 8bit alpha
"ASTT_NA"="1"
; Monitor display data channel
"DDC2Disabled"=dword:00000001
;
;Old tiling texture mode
"KD_TilingMode"=dword:00000000
"DXVA_WMV_NA"="0"
"DI_METHOD_NA"="0"
;>ACE is ON if you wanna OFF change to 30,00
"ACE"=hex:31,00
"DisableTiling"=dword:00000001
"DisableMMSnifferCode"=dword:00000001
"TextureLod_NA"="1"
;
"GCORULE_FlickerWA"=dword:00000001
"SameOnAllUsingStandardInVideoTheaterCloneMode"="1"
"Denoise_NA"="0"
"Detail_NA"="0"
"SplitScreen_NA"="0"
"TestOnceRequest_NA"="1"
"AutoTuneRequest_NA"="0"
"CameraShakeMotionDetect_NA"="1"
"DisableDualView"=dword:00000000
"DisableDualviewWithHotKey"=dword:00000001
"TVDisableModes"=dword:00000000
"DisableSWInterrupt"=dword:00000001
"DfpUsePixSlip"=dword:00000001
"Gxo50HzTimingSupport"=dword:00000001
"CVRULE_ENABLEPALTIMINGSUPPORT"=dword:00000001
"DFP_AddHDTVPixelFormats"=dword:00000003
"Gxo24HzTimingSupport"=dword:00000001
"DisableIDCT"=dword:00000000
"DisableFullAdapterInit"=dword:00000000
"DALRULE_AllowNativeModeAsDefaultModes"=dword:00000001
"DisableFBCSupport"=dword:00000000
"RemovableSources"=dword:00000000
"TVM6Flag"=dword:00000001
"UserMustConfirm"=dword:00000001
"DAL_ACEspectReady"=dword:00000001
"LCDSplitdisplayMode"=dword:00000000
;
"ExtEvent_BIOSEventByInterrupt"=dword:00000001
"DfpUsePixSlip"=dword:00000001
"DFP_AddHDTVPixelFormats"=dword:00000003
"DalAllowHSyncVSyncAdjustment"=dword:00000001
"DalAllowCompositeSyncAdjustment"=dword:00000001
"TheaterMode_NA"="1"
"DisableOGL10BitPixelFormats"=dword:00000000
"Activity_NA"="0"
"GXOxvYCCSupport"=dword:00000001
"Adaptive De-interlacing"=dword:00000001
"VPE Adaptive De-interlacing"=dword:00000001
"Main3D_NA"="0"
"Tesselation_NA"="0"
"CatalystAI_NA"="0"
"FastZClearEnabled"="1"
;
;>Another Great Tweak for Dx9 Games FPS Boost (you'll have to put this in TXT.REG and merge, I've e-mail this to our coder so it will be in RadeonMOD):
"KMD_APlusISharedMiniSegmentSize"=dword:0x4
"KMD_APlusISharedMiniSegmentOptions"=dword:0x7
;
;>WDDMv1.3 1 - on, 0 - off (atikmdag.sys)
"KMD_ForceWDDMv1.3"=dword:00000000
;

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0000\UMD]
;>Flip Queue Size set to as low as possible. Works best on Windows 10 LTSB, not as ideal after 1607 but hey, it's free low-latency!
;>
"FlipQueueSize"=hex:31,00,00,00
"PowerState"=hex:30,00,00,00
;Follow above rule eg. 0 = App. controled, 2,4,8,16 Forced Mode
"AreaAniso_DEF"="16"
"SurfaceFormatReplacements_DEF"="0"
"AnisoType_DEF"="0"
;(AF: 1=2x, 2=4x, 3=8x, 4=16x / 0=App controlled )
"AnisoDegree_DEF"="4"
"ForceTripleBuffering"=hex:30,00,00,00
"ForceTripleBuffering_DEF"="0"
;
;
;old ATI Tray Tweak, 0 default means 32Bit, 1=16Bit and 2=24Bit
"ForceZBufferDepth_DEF"="1"
;Zbuffer depth
"ForceZBufferDepth"=hex:31,36,00,00
"ForceZBufferDepth_SET"=hex:30,20,31,36,20,32,34,00
;
"Tessellation_OPTION_DEF"="2"
"NoOSPowerOptions"="0"
;
;>Main3D default flip is increased by 2 frames (will still feel like 3-4 prerendered NVIDIA);
"Main3D_DEF"="0"
;>
;>(Main pre-rendered frames reduced);
"Main3D"=hex:30,00,00,00
;>(Setting Main3D_SET to defaults for safety, to make sure it switches properly.);
;Default "Main3D_SET"=hex:30,20,31,20,32,20,33,20,34,20,35,00
"Main3D_SET"=hex:30,20,31,20,32,20,33,20,34,20,35,00
;
;>= Experimental buffering tweak;
"GLPBMode_DEF"="0"
;
"HighQualityAF"=hex:31,36,00,00
;
;(it means is App. controled, we can lower it for FPS boost but we will have lower Image Quality: 32,00-31,36 )
"AnisoType"=hex:31,36,00,00
"SurfaceFormatReplacements_DEF"="0"
;(it means is App. controlled, 30,00=App controlled 32,00=2x 34,00 =4x 38,00=8x 31,36=16x for MAX Image Quality)
"AnisoDegree"=hex:31,36,00,00
"AnisoDegree_SET"=hex:31,36,00,00
"SwapEffect"=hex:30,00,00,00
;
;>LOD Bias 'LodAdj' and assign value between -5 (Crisp Detail) to 5 (Faded Detail)
"LodAdj"="-5"
;
;(give 31,00 No Visible Quality loss but increase in FPS and further Texture drawing/See down)
"TextureOpt"=hex:31,00,00,00
;(is Texture Optimisation Tweak, 1 for ON)
"TextureOpt_DEF"="1"
;(Texture Level of Detail switch 31,00 means ON, 30,00 Default REG State)
"TextureLod"=hex:31,00,00,00
;(Texture Level of Detail switch, You can give sharp to blurry, for More sharp give: -1 for blurry: 1)
"TextureLod_DEF"="1"
"TextureLod_NA"="1"
;
"VSyncControl"=hex:30,00,00,00
;(You can change here for 2,3,4 | 3 is for Dynamic and 4 is for Lock to monitor, You have to try and see)
"VSyncControl_DEF"="4"
"ExportBumpMappedTex"=hex:31,00,00,00
;
;
;Extra RadeonPro era tweaks that might or might not work. Won't hurt to try.
"TrilinearOptimise"=hex:31,00,00,00
"AnisotropyOptimise"=hex:31,00,00,00
;Radeon AI Texture Filtering switch
"CatalystAI"=hex:30,00,00,00
;(1 means AI is ON for OFF put 0 and in above option put hex:30,00 it's a Good Tweak for Benchmarking )
"CatalystAI_DEF"="0"
"AdaptiveAAMethod"=hex:31,00,00,00
;.>CatalystAI
"CatalystAI_NA"=hex:30,00,00,00
;
"ATMS_NA"="0"
;(The Adaptive AA filter setting. Default value is 31,00 (Smooth +1). All values: Smooth 30 00, +1 Smooth 31 00, +2 Smooth 32 00, +3 Smooth (Sharp) 33 00.)
"ATMS"=hex:33,00,00,00
;(same as above but numeric values)
"ATMS_DEF"="3"
"CFM_SET"="0,1,2,3"
"CFM_DEF"="1"
;Geometry Instancing is ON
"GI"=hex:30,00,00,00
;DEF means Definition and is basicly for ON=1 or OFF=0 and sometimes you can set there 2,3,4
"GI_DEF"="0"
;
;
"AntiAlias"=hex:31,00,00,00
"AntiAliasSamples"=hex:31,00,00,00
;Default "AntiAliasSamples_SET"=hex:30,20,32,20,34,20,38,00
"AntiAliasSamples_SET"=hex:30,20,32,20,34,20,38,00
"AntiAlias_DEF"="1"
"AntiAliasSamples_DEF"="1"
"AAF"=hex:32,00,00,00
"AAF_DEF"="1"
"AAF_Value_SET"="Standard:0,Edge-detect:3"
;Default "AAF_Mapping_SET"="0(Standard:2,Edge-detect:12) 2(Standard:2) 4(Standard:4,Edge-detect:12) 8(Standard:8,Edge-detect:24) 16(Standard:16)"
"AAF_Mapping_SET"="0(Standard:2,Edge-detect:12) 2(Standard:2) 4(Standard:4,Edge-detect:12) 8(Standard:8,Edge-detect:24) 16(Standard:16)"
"EQAA_DEF"="1"
"EQAA"=hex:30,00,00,00
;Morphological filtering
"MLF"=hex:31,00,00,00
"MLF_NA"="0"
"MLF_DEF"="0"
;Default "EQAAMapping_SET"="0(0:0,1:0) 2(0:2,1:2) 4(0:4,1:4) 8(0:8,1:8,2:16)"
"EQAAMapping_SET"="0(0:0,1:0) 2(0:2,1:2) 4(0:4,1:4) 8(0:8,1:8,2:16)"
;>0,1,2,3 is Mode xAA means 3 is x8 Temporal so it's 32AA
"TemporalAAMultiplier_DEF"="3"
"TemporalAAMultiplier_NA"=hex:33,00,00,00
"TemporalAAMultiplier"=hex:33,00,00,00
"AAAMethod_DEF"="1"
"TruformMode_DEF"="1"
"TruformMode_NA"=hex:33,00,00,00
"TruformMode"=hex:33,00,00,00
"ExportCompressedTex_DEF"="3"
"ExportCompressedTex"=hex:33,00,00,00
;
;old ATI Tray Tweak - alternate Pixel center Tweak
"PixelCenter_DEF"="0"
;Pixel Center On/OFF switch
"PixelCenter"=hex:30,00,00,00
;
"ASTT"=hex:30,00,00,00
"ASD"=hex:2d,00,31,00
"ASE"=hex:31,00,00,00
;
;here is HEX 31,00 means ON/1 and 30,00 means OFF/0
"DitherAlpha_NA"=hex:31,00,00,00
"EnableTripleBuffering"=hex:30,00,00,00
"Tessellation"=hex:32,00,00,00
"Tessellation_OPTION"=hex:30,00,00,00
"Tessellation_DEF"="0"
"Tessellation_SET"="31,20,32,20,34,20,36,20,38,20,31,36,20,33,32,20,36,34,00"
"SurfaceFormatReplacements"=hex:30,00
;Texture filtering quality set to High 1 of 2
"TFQ"="2"
;Texture filtering quality set to High 2 of 2
"TFQ_DEF"="1"
;here is HEX 31,00 means ON/1 and 30,00 means OFF/0, Z Stencil Format 16/24/32 Bits
"ZFormats_NA"=hex:31,00,00,00
"PowerState"=hex:30,00,00,00
"AntiStuttering"=hex:31,00,00,00
;
;>Enhanced Sync
"TurboSync"=hex:31,00,00,00
;
;>Shader cache 30,00 = IS OFF. Enable if you got problems with emulators, CEMU etc. BUT FIRST RESET SHADER CACHE IN RESET IN RADEON GRAPHICS SETTINGS!!!!!!.
; Grammar: 32,00 = cache all programs run in DirectX. 31,00 = Normal, On. 30,00 = Shader Cache OFF.
"ShaderCache"=hex:30,00,00,00
;
"ZMaskEnable"=hex:31,00,00,00
"ZCompressionMode"=hex:32,00,00,00
"ForceMipFilter"=hex:30,00,00,00
;

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\amdkmdag]

;>WDDMv1.3 1 - on, 0 - off (atikmdag.sys)
"KMD_ForceWDDMv1.3"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\amdkmdag\UMD]

;This is just prerendered frames added to AMD service tag. Might not do a damn compared to the UMD same strings, but worth a shot 2 make sure.;

"FlipQueueSize"=hex:31,00,00,00
"Main3D"=hex:30,00,00,00
"Main3D_DEF"="0"
;>(Setting Main3D_SET to defaults for safety, to make sure it switches properly.);
;Default "Main3D_SET"=hex:30,20,31,20,32,20,33,20,34,20,35,00
"Main3D_SET"=hex:hex:30,20,31,20,32,20,33,20,34,20,35,00
;
;>LOD Bias 'LodAdj' and assign value between -5 (Crisp Detail) to 5 (Faded Detail)
"LodAdj"="-5"
;

[HKEY_LOCAL_MACHINE\SOFTWARE\AMD\CN]
;Disabling radeon relive's telemetry..;
"CollectGIData"=dword:00000000
"PreloadDelay"=dword:00000064
"UnloadDelay"=dword:00000064
"MemorySizeTreshold"=dword:00000100

[HKEY_LOCAL_MACHINE\SOFTWARE\AMD\Install]

;Yeah, that's it... just disabling User experience program now.;
"AUEP"=dword:00000000

[HKEY_CURRENT_USER\Software\AMD\CN]
"NotifyToEnableDVRDone"=dword:00000000

[HKEY_CURRENT_USER\Software\AMD]
"DVRTrackingEnabledBuild"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0000\UMD\DXVA]
"CmMode_ComprArtifRemov"="1"
"CmMode_Denoise"="1"
"CmMode_FalseContour"="1"
"CmMode_FrameRateConv"="1"
"CmMode_SuperRes"="1"
"CmSupp_Deint"="1"
"CmSupp_Denoise"="1"
"CmSupp_FrameRateConv"="1"
;
;(Radeon Video H/W Acceleration ON/OFF)
"DXVA_WMV"=hex:30,00
"DXVA_WMV_DEF"="0"
;
"WhiteBalanceCorrection_DEF"="1"
;
"3to2Pulldown"=hex:31,00,00,00
;
"3to2Pulldown_DEF"="1"
;
"CameraShake_ENABLE_DEF"="0"
;
;>;ON for YouTube etc. H/W decoding
"InternetVideo_DEF"="0"
"InternetVideo"=hex:30,00,00,00
;
"OvlTheaterMode_DEF"="0"
"TrueWhite_DEF"="0"
"LRTCCoef_DEF"="100"
"OvlTheaterModeType_DEF"="0"
"LRTCEnable"=hex:30,00,00,00
"LRTCEnable_DEF"="0"
"BlueStretch_DEF"="1"
"StaticGamma_ENABLE_DEF"="0"
"DemoMode_DEF"="0"
"DI_METHOD"=hex:2d,00,31,00,00,00
"Detail_DEF"="10"
"Detail_ENABLE_DEF"="0"
"Denoise_DEF"="64"
"Denoise_ENABLE_DEF"="0"
"OverridePA_DEF"="0"
"ColorVibrance_DEF"="40"
"ColorVibrance_ENABLE_DEF"="1"
"W7VideoExperience_NA"="1"
"StaticGamma"=hex:31,00,30,00,30,00,00,00
"StaticGamma_DEF"="100"
"DI_METHOD_DEF"="-1"
"MosquitoNoiseRemoval_DEF"="50"
"MosquitoNoiseRemoval_ENABLE_DEF"="0"
"Deblocking_DEF"="50"
"Deblocking_ENABLE_DEF"="0"
"CameraShakeStrength_DEF"="1"
"CameraShakeDelay_DEF"="1"
"CameraShakeZoom_DEF"="95"
"CameraShakeDisplayLogoVersion"="0"
"DeblockingAuto_DEF"="1"
"MosquitoNoiseRemovalAuto_DEF"="1"
"DenoiseAuto_DEF"="1"
"ColorStretchStd_ENABLE_DEF"="1"
"ColorStretchAdv_ENABLE_DEF"="0"
"ColorStretchGain_DEF"="100"
"ColorStretchAngle_DEF"="0"
"ColorStretch_NA"="0"
"FalseContour_ENABLE_DEF"="0"
"FalseContourStrength _DEF"="50"
"FalseContour_NA"="0"
"UpsampledArtifact_ENABLE_DEF"="0"
"SuperResolution_ENABLE_DEF"="0"
"SRDEStrength_DEF"="3"
"SuperResolution_NA"="0"
"W7VideoExperience_ENABLE_DEF"="0"
"OverridePA_ENABLE_DEF"="1"
"Fleshtone_DEF"="50"
"Fleshtone_ENABLE_DEF"="0"
"DynamicRange_DEF"="0"
"DynamicRange_ENABLE_DEF"="1"
"BlueStretch_ENABLE_DEF"="1"
"DynamicContrast_ENABLE_DEF"="0"
"OvlTheaterMode"=hex:30,00,00,00
"TrueWhite"=hex:30,00,00,00
"Denoise"=hex:36,00,34,00,00,00
"Denoise_ENABLE"=hex:31,00,00,00
"Detail"=hex:31,00,30,00,00,00
"Detail_ENABLE"=hex:31,00,00,00
"ColorVibrance"=hex:34,00,30,00,00,00
"ColorVibrance_ENABLE"=hex:31,00,00,00
"Fleshtone"=hex:35,00,30,00,00,00
"Fleshtone_ENABLE"=hex:30,00,00,00
"WhiteBalanceCorrection"=hex:30,00,00,00
"DynamicContrast_ENABLE"=hex:30,00,00,00
"LRTCCoef"=hex:31,00,30,00,30,00,00,00
"BlueStretch"=hex:31,00,00,00
"BlueStretch_ENABLE"=hex:31,00,00,00
"StaticGamma_ENABLE"=hex:30,00,00,00
"DynamicRange"=hex:30,00,00,00
"OverridePA"=hex:30,00,00,00
"DemoMode"=hex:30,00,00,00
"Deblocking"=hex:35,00,30,00,00,00
"Deblocking_ENABLE"=hex:30,00,00,00
"MosquitoNoiseRemoval"=hex:35,00,30,00,00,00
"MosquitoNoiseRemoval_ENABLE"=hex:30,00,00,00
"SuperResolutionValue"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"SRDEStrengthValue"=hex:01,00,00,00,00,00,00,00,2c,01,00,00,00,00,00,00
"SRDeNoiseValue"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"SRAutomaticDNValue"=hex:01,00,00,00,00,00,00,00,64,00,00,00,00,00,00,00
"SRDNStrengthValue"=hex:01,00,00,00,00,00,00,00,00,19,00,00,00,00,00,00
"CameraShakeValue"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"CSStrengthValue"=hex:01,00,00,00,00,00,00,00,64,00,00,00,00,00,00,00
"CSDelayValue"=hex:01,00,00,00,00,00,00,00,64,00,00,00,00,00,00,00
"CSZoomValue"=hex:01,00,00,00,00,00,00,00,1c,25,00,00,00,00,00,00
"CS2SimpleValue"=hex:01,00,00,00,00,00,00,00,00,00,00,00,01,00,00,00
"CS2SideBySideValue"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"CS2DispLogoValue"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"CS2MvDectValue"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"CS2MVStatusValue"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"BSAllFeaturesValue"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"BSSteadyVidOnlyValue"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"EdgeEnhancementValue"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"EEStrengthValue"=hex:01,00,00,00,00,00,00,00,e8,03,00,00,00,00,00,00
"DeNoiseValue"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"AutomaticDNValue"=hex:01,00,00,00,00,00,00,00,64,00,00,00,00,00,00,00
"DNStrengthValue"=hex:01,00,00,00,00,00,00,00,00,19,00,00,00,00,00,00
"MosquitoNoiseValue"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"AutomaticMNRValue"=hex:01,00,00,00,00,00,00,00,64,00,00,00,00,00,00,00
"MNRStrengthValue"=hex:01,00,00,00,00,00,00,00,88,13,00,00,00,00,00,00
"DeBlockingValue"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"AutomaticDBValue"=hex:01,00,00,00,00,00,00,00,64,00,00,00,00,00,00,00
"DBStrengthValue"=hex:01,00,00,00,00,00,00,00,88,13,00,00,00,00,00,00
"FalseContourValue"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"FCStrengthValue"=hex:01,00,00,00,00,00,00,00,88,13,00,00,00,00,00,00
"DynamicContrastValue"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"UpscaleArtifactValue"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"DeintAutoDetectValue"=hex:01,00,00,00,00,00,00,00,64,00,00,00,00,00,00,00
"DeintMethodValue"=hex:00,00,00,00,00,00,00,00,00,00,00,00,10,00,00,00
"DeintPullDownValue"=hex:01,00,00,00,00,00,00,00,64,00,00,00,00,00,00,00
"EnforceSmoothValue"=hex:01,00,00,00,00,00,00,00,64,00,00,00,00,00,00,00
"InternetVideoValue"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"VQOnDX11Value"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"ColorStretchAdvValue"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"ColStretchGain1Value"=hex:01,00,00,00,00,00,00,00,10,27,00,00,00,00,00,00
"ColStretchAngl1Value"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"ColStretchGain2Value"=hex:01,00,00,00,00,00,00,00,10,27,00,00,00,00,00,00
"ColStretchAngl2Value"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"ColStretchGain3Value"=hex:01,00,00,00,00,00,00,00,10,27,00,00,00,00,00,00
"ColStretchAngl3Value"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"ColStretchGain4Value"=hex:01,00,00,00,00,00,00,00,10,27,00,00,00,00,00,00
"ColStretchAngl4Value"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"ColStretchGain5Value"=hex:01,00,00,00,00,00,00,00,10,27,00,00,00,00,00,00
"ColStretchAngl5Value"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"ColStretchGain6Value"=hex:01,00,00,00,00,00,00,00,10,27,00,00,00,00,00,00
"ColStretchAngl6Value"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"ColorStretchStdValue"=hex:01,00,00,00,00,00,00,00,64,00,00,00,00,00,00,00
"ColStretchGainValue"=hex:01,00,00,00,00,00,00,00,10,27,00,00,00,00,00,00
"ColorVibranceValue"=hex:01,00,00,00,00,00,00,00,64,00,00,00,00,00,00,00
"CVStrengthValue"=hex:01,00,00,00,00,00,00,00,a0,0f,00,00,00,00,00,00
"ChromaCorrectorValue"=hex:01,00,00,00,00,00,00,00,64,00,00,00,00,00,00,00
"CCStrengthValue"=hex:01,00,00,00,00,00,00,00,e8,03,00,00,00,00,00,00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0000\DAL2_DATA__2_0\DisplayPath_13\Option]
"default"=hex:64
"All_nodes"=hex:42,65,73,74,56,69,65,77,4f,70,74,69,6f,6e,5f,48,64,6d,69,00
"BestViewOption_Hdmi"=hex:00,00,00,00,00,00,00,00,00,00,00,00,03,00,00,00,00,\
  b0,ff,ff,02,00,00,00,00,00,00,00

0 Likes
left4dead666
Adept II

i have an RX 5700XT and first i had alot of problems suddenly they came with a stable version... next thing Radeon Adrenaline 2020 and there came the errors, but for now with Driver version 20.1.4 its stable didn't have any problems since release!.

which videocard do you have?

0 Likes

He has a Radeon VII 

0 Likes