1st, I'm using SLES 10.
I followed the instruction for installing BROOK+CAL contained in "readme_install.txt" (choosing to install in /usr/local). I then went to the sample code in /usr/local/amdbrook/samples/apps/optimized_matmult and ran "make". All went fine and a "built_d" directory was created. Its contents are listed below:
-rw-r--r-- 1 root root 198232 2008-06-23 16:44 common.o
-rw-r--r-- 1 root root 20451 2008-06-23 16:44 optimized_matmult.cpp
-rw-r--r-- 1 root root 65110 2008-06-23 16:44 optimized_matmult_gpu.hpp
-rw-r--r-- 1 root root 627560 2008-06-23 16:44 optimized_matmult.o
-rw-r--r-- 1 root root 32840 2008-06-23 16:44 Timer.o
But where's the "a.out" or whatever the executable is named?
-jski
THANKS! Should have looked in the Makefile (OUTPUTBASE := samples/bin) - duhhh!
---Jski
I built and ran this (optimized_matmult_d) on an Opteron box with an NVidia Quadro FX 540. No problems! I assume it's using the NVidia GPU?
---jski