Under new driver forcing AF seems not working at all. Even in case of DX9 games (tried to set it for Oblivion).
Cant revert to older driver because there is none (5600xt here).
What to do?
На данный момент есть 4 драйвера для 5600, прямо под выбором операционной системы есть кнопка, предыдущие драйверы и старые драйверы
I tried all the drivers with no success. The "2020" drivers are just broken completely. Now I also have problems running some older games.
I have a similar problem with my 5700 XT. Neither the Anisotropic filtering nor the Anti-Aliasing overrides work in DX9 games. I first noticed the problem when playing Skyrim VR. When I upgraded from a Geforce 1060 to a Radeon 5700 XT. I immediately noticed the roads in Skyrim VR were blurry. With my old Geforce 1060, I always had 16X Anisotropic filtering Globally forced on. So, I went into the Radeon software and forced it on. It didn't work. Then I tried several other DX9, DX11, and DX12 games. The only game I ever got to respond to the overrides was Serious Sam Fusion in DX11 mode.
Unlike your 5600 XT. I have a 5700 XT. So I started back with driver version 19.10.1. No driver version I have tried works. The features do seem broken.
I see this on my 5600XT as well; and the failure to force AA on DirectX games, or it shows graphic corruption/artifacts in some old games like Links 2003 and Visual Pinball X.
20.2.2 didn't address it.
Thanks for the post, i will file a ticket for this issue.
Does it happen in any other DX9 titles or just Oblivion? If you could provide the names of a few more games that would help.
Amdmatt: Here's a couple more, Links 2003 and Visual Pinball X. Note the artifacts on golfer and on pinball flippers and lanes circled in red.
Is that using Anisotropic Filtering or Anti Aliasing though? If that's with AA then that is a separate issue.
I saw your thread and am working my way towards that so i will update it in due course.
I have AA and Anistropic filtering both set to override applications, figured I'd give you some datapoints as the poster lcountach above mentioned them both too. Maybe none of the usual suspects are getting respected in DX9 games. Good luck, thanks for jumping on the issue. Fingers crossed for 20.3.1.
What happens if you just use Anisotropic filtering at x16 and leave all AA settings set to default? Do you have a screenshot of what that looks like?
The ticket i filed is on these AF settings not getting applied to DX9 titles. Corrupted and or missing textures is something different and would require a different ticket.
FWIW, same corruption w/ AA set to use application settings (supersampling chosen as method though) and AF set to 16. Note that Links2k3 didn't have individual settings for AA or AF in its graphic options, it's all coming from Adrenaline. Apologies for sidetracking the thread.
Is there any change is supersampling if left at the default setting rather than set as the chosen method?
There is no change, corruption remains I tried multisampling and adaptive multisampling.
It also doesn't make a difference if you choose 'Enhance application settings'.
Same problem with 5700xt and DX9 Trainsimulator Zusi (www.zusi.de): Change the Anti-Aliasing to Supersampling has no effect. With every Driver since Roll-Out last year.
Supersampling works with RX580 and Vega56, but not with 5700xt.
To add to the list of games other than Oblivion. Off the top of my head. Here are some games I remember testing. Skyrim VR (I suspect is DX9), Test Drive Unlimited 1 (DX9), Serious Sam (Stand alone versions), Serious Sam Fusion, Space Engineers (DX11?), and Contagion (DX9?)
The Serious Sam games supported DX9, DX11, and DX12 depending on the version being played. The only one of that bunch where Anisotropic filtering override worked was SS Fusion in DX11 mode. I think the issue extends to more than just DX9 games.
Because Anisotropic filtering override didn't seem to work in anything. I retested several of the games to see if Anti-Aliasing override worked. After three or so games testing AA override not working. I just got frustrated with the whole mess and stopped testing. As new driver releases come out. I occasionally retest Skyrim VR or TDU to see if things are fixed. So far they are not.
Anitaliasing and AF settings still dont work under new 2020.3.1 driver. Seriously, *** AMD?
Retrieving data ...