- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Post your AMD Cinebench R23 Scores Here
Cinebench R23 was released today for download, and it is MUCH HARDER on the CPU than R20, I even had to lower my overclock to pass it. Mods can we get this stickied, as a very common complaint is "My processor is underperformning", and this will provide a thread of reference that's not a stock, clean system like the review sites use.
Similar to the R20 thread, please post the screenshot below, and add your RAM capacity and speed in the notes.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Here's mine.... clearly shows that OverClocking Zen2 is pointless
QB
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
You have the same Processor and RAM speed and amount of GB as I do yet your Multicore results are 1200 points higher than mine at stock settings except I have my RAM set at 3600 Mhz in BIOS.
Your single core results are 66 points higher than mine.
So if your processor is Overclocked it does make a difference.
I see that Black Zion also has his processor Overclocked and both of your scores are fairly close to each other.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Not overclocked... if you look closely at my post, I included the relevant settings I used. But since you missed it, I will post them here
I use PBO (not in the AMD CPU settings, but in the normal BIOS) everything in there is at default except PBO is enabled... no other tweaks or settings adjusted
I then apply a CPU voltage offset of -0.125V
RAM is tuned, but that does not make a difference for Cinebench
QB
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
3700x PBO & XMP ENABLED. 32gb 3200 CL16 B450
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Nice to see my slower memory isn't too much of a deficit.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
After installing a second CPU Cooler fan (200 CFM) I am able to stress my Ryzen 7 3700X without overheating or throttling. Using 32 GB 3600 Mhz G-Skill RAM. PBO on default BIOS setting of "Auto".
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2x16 3200 16-18-18
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
That's with PBO enabled.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
System set to 1.3V and a CCD based manual overclock. CCD0 and CCD1 are set at 4.4 GHz while the other two are at 4.2 GHz. RAM is 32 gB, 4 DIMMs at 3600 Mhz CL16.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
45,159 points
AMD Ryzen 9 7950x
64GB (4x 16GB) G.Skill Z5 Neo DDR5 6000
custom water loop
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Ryzen 9 7900X3D
Corsair H150i Elite (360mm)
32GB DDR5 6000Mhz C30
Score: 28192