Processors

[Utopia1]

So I just built my first pc and I think something is wrong. My temps are usually these - All are on degrees celsius -

- Cinebench 24 --> 89 full run

- CP2077 -->  Peak 88 on benchmark 

- Idle temp --> computer just initiated  - 51 to 61 

I am using the thermal paste that came with the water cooler, maybe that is the problem? Or should I do something else? 

My settings are -

- AMD Ryzen 7 7800X3D - EXPO ON - 1.28V SoC

- RTX 4070 Super Gigabyte Gaming OC

- Asus ROG Strix B650-A Gaming Wi-Fi

- Water Cooler Corsair H150i Elite, RGB, 360mm

- XPG Lancer, RGB, 32GB (2x16GB), 6000MHz, DDR5, CL30

[FunkZ · Accepted solution]

HWINFO shows a bit more variables than other apps, which sensor in particular are you looking at when you state your CPU ranges from 51°-89°C?

I believe the pertinent reference to look at in HWINFO is "Core Temperatures" which at a range of 40°-65°C, or "CPU Die (average)" at 52°-67°C would be more in line with what for example, Ryzen Master would show.

[misterj]

Utopia1, what are you using for measuring temperatures; please post a screenshot? What is the ambient temperature? Have you tried running your pump on 12 Volt? Any crashes?  John.

[Utopia1]

Ambient temp - 22 C - IDLE

[FunkZ · Accepted solution]

HWINFO shows a bit more variables than other apps, which sensor in particular are you looking at when you state your CPU ranges from 51°-89°C?

I believe the pertinent reference to look at in HWINFO is "Core Temperatures" which at a range of 40°-65°C, or "CPU Die (average)" at 52°-67°C would be more in line with what for example, Ryzen Master would show.

[misterj · Accepted solution]

Thanks, Utopia1. I agree with FunkZ. I know little to nothing about HWINFO since I do not trust it and do  not use it. His implication is the readings he pointed out are more close to Ryzen Master (RM) than others. Thanks, John.

[Utopia1]

I was able to fix it, the AIO wasn't working properly. Thanks for the help - Misterj and FunkZ