PC Processors

[jjjrisco]

Hola. Saludos a tod@s.

     Tengo instalado el windows 7 totalmente actualizado. He instalado la última Bios disponible para mi placa y me he asegurado qué procesador podía poner en mi placa.

     Tenía un procesador FX 6100 y lo he cambiado por un FX 8300.

     Cuando he iniciado Windows, automáticamente me ha reconocido el procesador y me los ha instalado individualmente los ocho nucleos. En el administrador de dispositivos aparecen en el apartado de procesadores los ocho individualmente como AMD FX(tm)-8300 Eight-Core Processor (3.32 GHz) sin ningún problema.

     He reinciado correctamente y he mirado la configuración para ver si me los había aceptado bien. Me da la siguiente información en estos tres programas:

               -     Administrador de tareas. Rendimiento.- 6 nucleos

               -     MS Config. Arranque. Opciones Avanzadas de arranque. Numero de procesadores: 6

               -     Programa utilidades de la placa base:        - Specification: AMD FX(tm)-8300 Eight-Core Processor

                                                                                          - Instructions: MMX(+),SSE(1/2/3/4A),SSSE3,X86-64,AMD-V

                                                                                          - L1 Data: 6x16 KBytes               - L1 Trace: 3x64 KBytes

                                                                                          - L2 Cache: 3x2048 KBytes       - L3 Cache: 8192 KBytes

                                                                                          - Cores: 6                                    - Threads: 6

     En fin, que no reconoce los seis nucleos. No sé si tiene algo que ver con que al anterior fuera de seis y tenga que "desinstalar" de alguna manera la configuración antigüa, o que no reconoce el micro correctamente.

     Me gustaria que alguien me ayudase con el problema que tengo.

     Gracias.

[elstaci]

You probably need to reset your BIOS either through BIOS itself or by removing the CMOS Battery from the motherboard (Read you manual on how to do this correctly).

Afterwards go to MSCONFIG.exe and set the Processors to "8" and restart and see if Windows recognizes all Cores.

EDIT: Forgot to mention this is an English Only Forum. Please reply back with a translation in English.

[jjjrisco]

     Hi. Greetings to everyone.

     I have installed windows 7 completely updated. I have installed the latest Bios available for my board and I have made sure what processor I could put on my board.

     I had an FX 6100 processor and I changed it for an FX 8300.

     When I started Windows, I was automatically recognized by the processor and the eight cores were installed individually. In the device manager appear in the section of processors the eight individually as AMD FX (tm) -8300 Eight-Core Processor (3.32 GHz) without any problem.

     I have correctly rebooted and looked at the configuration to see if I had accepted them correctly. It gives me the following information in these three programs:

          -     Task Manager. Performance.- 6 cores

          -     MS Config. Start. Advanced boot options. Number of processors: 6

          -     Utilities program of the motherboard:               GIGABYTE 970 A-DS3 Rev. 1.1 Bios F7d

                                                                                          - Specification: AMD FX(tm)-8300 Eight-Core Processor

                                                                                          - Instructions: MMX(+),SSE(1/2/3/4A),SSSE3,X86-64,AMD-V

                                                                                          - L1 Data: 6x16 KBytes               - L1 Trace: 3x64 KBytes

                                                                                          - L2 Cache: 3x2048 KBytes       - L3 Cache: 8192 KBytes

                                                                                          - Cores: 6                                    - Threads: 6

     Does not recognize the six cores. I do not know if it has anything to do with the previous one out of six and have to "uninstall" in some way the old configuration, or that does not recognize the micro correctly.

     Thank you.

EDIT: Your answer do not work.

[jjjrisco · Accepted solution]

     Ya lo he solucionado. Es muy fácil y no necesita abrir la placa ni hacer nada. Es todo software.

     Gracias.

[elstaci]

Glad to hear. But what exactly did you do and what software was causing the issue.

I would like to know for a future reference in case other Users have a similar problem. I could suggest your fix.

Thanks in advance.