PC Processors

[alienkovich]

CPU - A10-5800K with Radeon Graphics 7660D

Mobo - MSI fm2-a85xa-g65

Memory - Kingston 2x12800 MHz

My 1080Ti died few days ago and I wanted to use intergraded graphics from my APU on Win 10.

Trouble is, drivers I've downloaded from AMD site are crashing within few minutes in windows, first I'm getting weird lines on screen and finally BSOD with stop code VIDEO_TDR_FAILURE. 
I've tried both drivers on AMD page for Win 10. 

If I use Microsoft Basic Display Adapter computer works fine, but obviously I can't use any Directx based software.

I'm using HMDI cable plugged in motherboard connected to my TV, if that's important.

Also, comp is free from dust and APU doesn't overheat. 

I know this setup is pretty ancient but I was hoping to use it until my card gets back from shop. 

Any advice would be much appreciated. 

Thanks in advance. 

[elstaci]

First use DDU to uninstall all traces of the Nvidia & AMD GPU driver from your PC and then download one of the 2 last AMD drivers for your APU from here: https://www.amd.com/en/support/apu/amd-series-processors/amd-a10-series-apu-for-desktops/a10-5800k-r...

Also go to MSI Support and make sure you have the latest BIOS and  AMD Chipset installed from their download page: https://www.msi.com/Motherboard/support/FM2-A85XA-G65#support-main-block-download

There are no AMD Chipsets at AMD Download page for your old Motherboard so you need to make sure the last MSI AMD CHIPSET Driver is installed.

From MSI Support concerning your Motherboard's Specs: https://www.msi.com/Motherboard/FM2-A85XA-G65/Specification