Hi everybody!
I'm experiencing a similar issue to a topic already posted before: my two monitor turn black during gaming sessions, system is not responsive anymore and needs a hard reset via power off/on switch at the PSU -> with the front panel power button a reboot is not possible in that state. Also, reducing the system to use only ONE monitor does not help!! The error prevails!
Regarding my setup:
Games statistics:
CPU heat metric:
Summary:
As you can imagine, being left with a black screen during competitive gaming sucks big time!
Hence, any further help or suggestions to solve that issue are highly appreciated - thanks in advance!
Not sure but according to your Motherboard's IGPU specs the maximum DP and HDMI output is 60hz: https://www.gigabyte.com/Motherboard/A520M-DS3H-rev-1x/sp#sp
Since you are running the DP Display at 1920x1080@144hz not sure if that is within the motherboard's specs for its DP Video output.
thanks for that information - I looked further into the manual (https://download.gigabyte.com/FileList/Manual/mb_manual_a520m-ds3h-ac_e_1201_v2.pdf?v=8b9929d35e8032...) and it is stated there on page 10:
"DisplayPort (Note 1)
[..]
Note: The DisplayPort
Technology can support a maximum resolution of 5120x2880@60 Hz but the actual resolutions supported
depend on the monitor being used."
For HDMI it is stated something similar, but since that 2nd monitor is running 60Hz anyway I wont bother further into it.
In conclusion: I don't think and agree with your idea that by running at 144Hz I'm using the motherboard not according to the tech. spec, as in the motherboard manual it is stated that the supported resolutions depend on the monitor itself.
However, for the sake of knowledge I will try to run the 1st DP monitor now with 60Hz and observe if the crashes still happen or not - I will report back accordingly.
Deleted my answer after I reread your original Post.
You mentioned you still have problems with just one Monitor installed. I didn't see that or skipped over it.
Then your problem is something else than what I stated in my previous reply.
I would check your PSU to make sure it is working correctly and giving out proper PSU Outputs. You can use OCCT to check that out. Observe all Temperatures and PSU Outputs during the testing if you use OCCT.
All of your PSU Outputs should be within a +/- 5% range for the 12.0/5.0/3.3 Vdc under heavy loads.
as an example your 12.0 Vdc should be a minimum of 11.4 Vdc or higher during idle or heavy loads.
also having 2 monitors connected requires more power and with a failing PSU can cause power issues to occur.
Since you need to physically turn off and then on the PSU to boot up again after crashing.
Overheating APU doesn't seem to be a factor since it is way below the Maximum Operating Temperature while playing games. But possibly something else is overheating.
Also could be a defective APU. I would ask AMD Support - Warranty and see if they believe your APU might be defective or needs to be RMAed to be checked from here: https://www.amd.com/en/support/contact-email-form
Could also be a defective Motherboard so I would also open a Gigabyte Support ticket.
NOTE: Sorry about misleading you down the wrong path. I misread your original post. my fault.
There could be a lot of reasons...
- In some cases it happens when a CPU factory overclocking modes are enabled.
- In some cases it happens if XMP memory profile is enabled.
- It may happen because of PSU-related issues.
- It may happen because of motherboard-related issues.
- Less likely but still worth to check this out - CPU and SoC DC-DC components temperatures, because it doesn't have a passive cooling on this motherboard model its power transistors temperature may reach very high values when using a "tower" type of CPU cooler.
Also, it could be a CPU-related issue, but it's highly unlikely. Though a probability of this is non-zero (such cases still happen), as a repair services statistics shows it's very low, not that much comparing to most of another issues that usually cause a general system instability.
By the way, this CPU has relatively low overclocking potential (that is above factory overclocking of 4.6 GHz). Which means, if it will be working stable with CPU factory overclocking disabled, you may want to try a "loadline calibration" option (if such one is available there in BIOS settings) to make it stable with CPU factory overclocking enabled.
You wrote "In some cases it happens if XMP memory profile is enabled."
As of now, after having XMP disabled for 3 days, I did not see any black screen crash anymore; only sometimes during gaming the screen is flickering, but its much better then rebooting by hand.
I will come back in a few days to confirm that no more crashes happened with XMP off.
XMP is not the cause!
I just run into another black screen with XMP off
The OCCT tests also did not reveal anything of significance ..
The latest post suggests to upgrade to a better hdmi cable, however my problem appears on the Display Port connected monitor (also if the other hdmi connected monitor is off). Hence, I don't see that as suitable for my solution.
Running out of ideas here ..
Did u find any kind of solution?
I am running into the exact same problem! Did you find a solution?
I also have the 5700G, 2 monitors (a 1080p monitor connected via hdmi and a 4k 60hz monitor connected via DP)
It's only the 4k monitor connected via DP that turns black sometimes. Mostly when gaming but sometimes not. The 1080p monitor is never affected. I’ve confirmed it’s nothing wrong with the monitor or DP cable as it works just fine on my other computer. I’ve messed with the memory just like you and determined that’s not the problem either. I have all the latest AMD drivers. I’m stuck!
Any solutions i have the same problem here
specs:
ryzen 7 5700g
ram: aorus 16gb (2x8) 3333mhz
Motherboard: gigabyte b550 Ds3h
I have the same problem. 5700G is the common denominator we all have. Even when running my lone 23.8 1080p 60hz monitor, I still experience this issue. When I leave it on overnight, it hangs and I can't click anything but my cursor is moving. Any fixes on this?
Hello. I have the exact same problem and it's driving me crazy. From the tests I did, it is not about excess temperature, nor a driver update, nor a bios update. Please tell me you found the solution and let's be happy again haha. Thank you
hi to any lost soul who might find this thread in the future .. fyi: I did not manage to find a solution with the Ryzen 7 5700G.
hence, my solution was to switch to a Ryzen 9 5900X with a dedicated/separate GPU.
Lost souls...That's how you start to feel indeed trying to use this CPU in a meaningful way. It didn't take long for me to figure out that putting a DGPU in the system was the only hope for some kind bearable GUI with a Ryzen 7 5700G and it's IGPU in the system. But that was not the end of the story....Blank screens like hardware failure, stuttering and sticking cursor behavior also on the DGPU.
I proved it possible to disable the IGPU in a way it does not interfere anymore with the DGPU by changing the BIOS settings. However traces of it remained; I still have AMD HD audio for some reason.
At least the system is stable now while video playback is possible without stutter on the DGPU. I guess I'll never know why this IGPU every 15 minutes chooses to freeze the system by going to 100% utilization without any reason whatsoever. The idea to take out this processor, open it up and carve out the IGPU with a blunt knife just to be sure it's stays dead won't leave my thoughts anytime soon....
Graphic problems with the IGP are often caused by the system memory. If disabling XMP improves IGP stability that all but confirms it. It might pass Memtest/OCCT but uses timings the IGP doesn't like, the IGP seems to be more sensitive to timings.
Have a 5700G in my HTPC and use the IGP every day, 4K 60Hz streaming and light game titles. DDR4-4000 with manually tweaked timings.
Thanks for your reply but before you do so next time read the post you reply to carefully:
I guess I'll never know why this IGPU every 15 minutes chooses to freeze the system by going to 100% utilization without any reason whatsoever.
Memory does not cause an IGPU to go to 100% utilization. Anyway the RAM had been replaced. Meanwhile the problem with the IGPU remained. Furthermore the fact that you have a system with a similar processor and faster memory (that runs video OK) does not mean my system will also run better with the memory configuration you have chosen.
My IGPU is faulty, it's that simple. But hey tweak on brother and you'll get your own hardware errors.
As closing:
Memory timings are not critical at all for an IGPU unless you get in a useless framerate battle over some game with someone where every frame counted counts. For an IGPU (or a GPU) it's the Gigabytes per second that count. You can see for yourself (in your own system) that with default timings and no XMP your IGPU can move high enough GB's per second to function properly. Just compare the results with a GPU on Techpowerup. The whole point I make is that pushing your CPU/IGPU to it's limits FOR NO PRACTICAL BENEFIT AT ALL demolishes it partly, prematurely, or both. Check your windows WHEA logs if you don't believe me.
I didn't reply to your post AMID. If I had, my response would be indented under yours, like this post.
I replied to AR0x7e7
That's good to know, thanks for letting me know. AR0x7e7 however won't be interested in your solution because a DGPU was acquired. I did the same thing.
This is what AR0x7e7 wrote:
hi to any lost soul who might find this thread in the future .. fyi: I did not manage to find a solution with the Ryzen 7 5700G. hence, my solution was to switch to a Ryzen 9 5900X with a dedicated/separate GPU
I totally agree that when hardware is broke you replace it. In both cases that was what was done after disabling the culprit on the chip or remove it altogether.
You see, it's still very useful to read someone else's post before replying
I had exactly same issues with a Ryzen 7 5700g and b550m Aorus Elite, if you're using 3200mhz module ram sticks or below that, maybe that's the issue.
Well, I solved my problem by underclocking my vega 8 apu, here is what I did....
1. GFX clock frequency: 2000mhz -> 1570mhz
2. GFX core voltage: 1.1v
3. Precision Boost Overdrive(PBO): Auto-> Disable
4 .CPU Clock ratio: 46.0->45.0
5 .CPU Core voltage: 1.307v
6 .Global C-State Control: Enable
Boom everything is fine now...
Wow! Finally the settings that does their magic. If only I hadn't bought 128Gb of way to slow RAM I would have had a system with a working IGPU also. Well all is not too bad.