Make sure you have minimum BIOS version F2 installed on your Motherboard to make the Ryzen 2700x work. X470 AORUS GAMING 7 WIFI (rev. 1.0) | Motherboard - GIGABYTE Global
| AMD | Ryzen 7 2700X | 8C/16T | 3.7GHz / 4.35GHz | 4MB | 16MB | N/A | Pinnacle Ridge | 12nm | B2 | 105W | F2 |
|---|
The latest BIOS for your motherboard is this one:
F4g
8.23 MB
2018/05/10
Update AGESA 1.0.0.2c
Also make sure your RAM MEMORY is listed in the Motherboard's QVL list. Ryzen are very picky about the RAM Memory that is installed: X470 AORUS GAMING 7 WIFI (rev. 1.0) | Motherboard - GIGABYTE Global . Download the Pinnacle Ridge Memory list.
Also you want to install the latest AMD Chipset from your Motherboard's Support:
Chipset
Does the damage appear to be where a CPU Pin is located underneath? Do you see if any traces have been damaged using a magnifying glass?
These are all the Motherboard's Error Codes from Gigabyte concerning your Motherboard from the Manual:
3-3 Debug LED Codes Code Description
10 PEI Core is started.
11 Pre-memory CPU initialization is started.
12~14 Reserved.
15 Pre-memory North-Bridge initialization is started
16~18 Reserved.
19 Pre-memory South-Bridge initialization is started.
1A~2A Reserved.
2B~2F Memory initialization.
31 Memory installed.
32~36 CPU PEI initialization.
37~3A IOH PEI initialization.
3B~3E PCH PEI initialization.
3F~4F Reserved.
60 DXE Core is started.
61 NVRAM initialization.
62 Installation of the PCH runtime services.
63~67 CPU DXE initialization is started.
68 PCI host bridge initialization is started.
69 IOH DXE initialization.
6A IOH SMM initialization.
6B~6F Reserved. 70 PCH DXE initialization.
71 PCH SMM initialization.
72 PCH devices initialization.
73~77 PCH DXE initialization (PCH module specific).
78 ACPI Core initialization.
79 CSM initialization is started.
7A~7F Reserved for AMI use.
80~8F Reserved for OEM use (OEM DXE initialization codes).
90 Phase transfer to BDS (Boot Device Selection) from DXE.
91 Issue event to connect drivers.
Regular Boot -
43 - Code Description
92 PCI Bus initialization is started.
93 PCI Bus hot plug initialization.
94 PCI Bus enumeration for detecting how many resources are requested.
95 Check PCI device requested resources Code Description
B4 USB device hot plug-in.
B5 PCI device hot plug.
B6 Clean-up of NVRAM.
B7 Reconfigure NVRAM settings.
B8~BF Reserved.
C0~CF Reserved.
S3 Resume Code Description
E0 S3 Resume is started (called from DXE IPL).
E1 Fill boot script data for S3 resume.
E2 Initializes VGA for S3 resume.
E3 OS S3 wake vector call.
Recovery
F0 Recovery mode will be triggered due to invalid firmware volume detection.
F1 Recovery mode will be triggered by user decision.
F2 Recovery is started. F3 Recovery firmware image is found.
F4 Recovery firmware image is loaded.
F5~F7 Reserved for future AMI progress codes. Recovery Code Description
ERROR
50~55 Memory initialization error occurs.
56 Invalid CPU type or speed.
57 CPU mismatch.
58 CPU self test failed or possible CPU cache error.
59 CPU micro-code is not found or micro-code update is failed.
5A Internal CPU error.
5B Reset PPI is failed.
5C~5F Reserved.
D0 CPU initialization error.
D1 IOH initialization error. Error - 45 - Code Description
D2 PCH initialization error. D3 Some of the Architectural Protocols are not available.
D4 PCI resource allocation error. Out of Resources.
D5 No Space for Legacy Option ROM initialization.
D6 No Console Output Devices are found.
D7 No Console Input Devices are found.
D8 It is an invalid password.
D9~DA Can't load Boot Option.
DB Flash update is failed.
DC Reset protocol is failed.
DE~DF Reserved.
E8 S3 resume is failed.
E9 S3 Resume PPI is not found.
EA S3 Resume Boot Script is invalid.
EB S3 OS Wake call is failed.
EC~EF Reserved.
F8 Recovery PPI is invalid. Recovery capsule is not found.
FA Invalid recovery capsule.
FB~FF Reserved.
This thread the E8 error was solved by installing the RAM Memory in different slots: Rampage III Black Edition ERROR Codes E8, 01, 62 - Overclock.net - An Overclocking Community .
Another thread was solved due to User not connecting something correctly on the Motherboard. MSI X299 PLUS E0 error - [Solved] - Motherboards - Tom's Hardware
Here is the ATTACHED PDF MANUAL for your motherboard while I copied the above information:
