PC Processors

[chanu_9873]

so ive noticed Recently That My processor Runs at Full speed even low load as 2%,

It would consume more energy and runs the cpu at max freq for no use,

So ive set the minimum processor state to 5% it solved the problem but,

after doing some research on internet about this it says minimum processor state at 5% introduces core parking which is apparently bad,

So what should i do now setting the minimum at 90% would unneccessarily run the cpu at full speed at consume more power and emits heat.

[black_zion]

If any cores are parked, they will show as "parked" in Resource Monitor, and setting the minimum processor state to 5% does not cause cores to be parked. As you can see, I use those settings, the CPU's lowest speed state is 2.08ghz, and none of my cores are parked.