cancel
Showing results for 
Search instead for 
Did you mean: 

PC Processors

Picturesman10
Journeyman III

Max cooler mounting

Last year I had a local shop build a 64-bit PC o replace an old 32-bit. A Ryzen 3 Cpu was used

Since covid ,we've been on Zoom a lot. We found that the Ryzen 3 did not allow us to use many of Zoom's features. So I decided to upgarde to a Ryzen 7 CPU. Was told by ASUS that it would be plug and play, with no solfwate or hardware issues.

I removed the Ryzen 3 CPU easy enough, loosening the 4 screws on the Stealth Cooler. Installed the CPU in its socket.

Unforetuneately, the Ryzen 7 uses a Max cooler which uses some sort of two sided tension clamps to make solid contact with the CPU.

Now I'm stuck with a $300  CPU/cooler combo I can't attach to the CPU. Is there a solution for my problem?

 

Thanks

0 Likes
1 Solution

That is a very minor problem.

Go to the computer shop and  see if they will give a couple of standard Motherboard CPU brackets.

You can also purchase the brackets on Amazon cheaply like these: https://www.amazon.com/Retention-Bracket-Plate-Cooling-Mounting/dp/B07Y86XP7F/ref=sr_1_6?dchild=1&ke...

Screenshot 2021-09-21 175910.png

Or EBay: https://www.ebay.com/itm/183426270263

Screenshot 2021-09-21 175910.png

Those are the standard CPU Cooler mounting brackets on all motherboards. So all you need to do is find another motherboard and remove the brackets and install it on your motherboard as long as the brackets holes line up with the mounting plate behind the motherboard.

I am sure the computer shop can probably give you a couple of spare brackets for free because the are so common.

In fact you can use the same brackets from your old motherboard if you still have it.

NOTE: to tell you the truth any Rzyen should be good enough to run ZOOM and its features. also if you need to replace the Motherboard's rear mounting plate save it for the future. 

Many 3rd party CPU Coolers uses custom rear mounting plates for attaching their CPU Cooler to the processor.

 

View solution in original post

0 Likes
1 Reply

That is a very minor problem.

Go to the computer shop and  see if they will give a couple of standard Motherboard CPU brackets.

You can also purchase the brackets on Amazon cheaply like these: https://www.amazon.com/Retention-Bracket-Plate-Cooling-Mounting/dp/B07Y86XP7F/ref=sr_1_6?dchild=1&ke...

Screenshot 2021-09-21 175910.png

Or EBay: https://www.ebay.com/itm/183426270263

Screenshot 2021-09-21 175910.png

Those are the standard CPU Cooler mounting brackets on all motherboards. So all you need to do is find another motherboard and remove the brackets and install it on your motherboard as long as the brackets holes line up with the mounting plate behind the motherboard.

I am sure the computer shop can probably give you a couple of spare brackets for free because the are so common.

In fact you can use the same brackets from your old motherboard if you still have it.

NOTE: to tell you the truth any Rzyen should be good enough to run ZOOM and its features. also if you need to replace the Motherboard's rear mounting plate save it for the future. 

Many 3rd party CPU Coolers uses custom rear mounting plates for attaching their CPU Cooler to the processor.

 

0 Likes