PC Processors

[GaGy]

Yesterday while playing warzone I had the HW info running and even though I'm using the patched bios version 1413 the HW info recorded a high voltage on the SOC and a very high temperature above 100C. The motherboard is an Asus TUF b650 wifi . The CPU cooler is an Endorfy Fera 5 and I have never experienced such a temperature before. Unfortunately the HW info shows some bad information as well.

https://ibb.co/tXTnyQm 

[johnnyenglish]

Hi, I've heard that even after update there are still some problems with vSoC spikes. Try to see if you can do this inside BIOS, or revert back to a version that can. 

Also, read the other value for cpu soc inside HWiNFO to see if it has the same jump. Because 1.8 that is dangerously high. 

https://youtu.be/EF76fdyx6fs

[GaaRa005]

Hello. Have you solved this problem? 

I have the same problem now. My SOC voltage readings rise from 1.240 to 1.340, MISC voltage from 1.100 to 1.173. Things are much worse for you. I temporarily solved this problem by disabling AMD Adrenaline, only when it was running did this problem occur.

[johnnyenglish]

1.34 is just a tad above the hard limit imposed by vendors. However you can lower this value manually by... A lot!

I'm running stable 32gb 6000 cl32 with 1.2v vSoC with a 7950X

Try it.

[misterj]

Posters, if all of you really want to know what is going on, I urge you to quit using third party utilities and use only Ryzen Master for the true behavior of your Ryzen Processor. John.

EDIT: I should also say that some MB vendors offer applications to monitor and optimize performance of Ryzen processors. Some of these applications make changes that cause problems. I strongly advise that all these applications be removed from your system.

[GaaRa005]

Ryzen Master does not indicate the maximum and minimum values, but only the relevant changes.