Hi All,
We are currently working on a custom board based on a V3000 cpu.
I have been able to use and test it for quite a while, but I ran into a problem.
The problem I have encountered is on boot, it just hangs forever on AGESA code B000AA09.
After i try to reboot it ALOT of times eventually it boots fine until i reboot it again and it hangs.
tried to swap pretty much all swappable hardware, nothing helped.
Below is the last part of the debug bios output on the moment it hangs (the whole output is VERY long):
NbioSmuServiceRequestV13 Enter
Service Request 0x9
Service Request Argument 0x23, 0x0, 0x0, 0x0, 0x1, 0x5
AGESA_TP:[B000AA09]
NbioSmuServiceRequestV13 Exit
AGESA_TP:[B000A915]
Return Args = 0x3, 0x0, 0x0, 0x0, 0x1, 0x5
SmuDxioServiceRequest Exit Status = 0
SmuDxioServiceRequest Entry
GnbHandle Found
Input Args = 0x23, 0x0, 0x118B58, 0x74, 0x0, 0x3
AGESA_TP:[B000A914]
NbioSmuServiceRequestV13 Enter
Service Request 0x9
Service Request Argument 0x23, 0x0, 0x118B58, 0x74, 0x0, 0x3
AGESA_TP:[B000AA09]
NbioSmuServiceRequestV13 Exit
AGESA_TP:[B000A915]
Return Args = 0x3, 0x0, 0x118B58, 0x74, 0x0, 0x3
SmuDxioServiceRequest Exit Status = 0
SmuDxioServiceRequest Entry
GnbHandle Found
Input Args = 0x3A, 0x1, 0x0, 0x9, 0x1, 0x0
AGESA_TP:[B000A914]
NbioSmuServiceRequestV13 Enter
Service Request 0x9
Service Request Argument 0x3A, 0x1, 0x0, 0x9, 0x1, 0x0
AGESA_TP:[B000AA09]
NbioSmuServiceRequestV13 Exit
AGESA_TP:[B000A915]
Return Args = 0x3, 0x1, 0x0, 0x9, 0x1, 0x0
SmuDxioServiceRequest Exit Status = 0
SmuDxioServiceRequest Entry
GnbHandle Found
Input Args = 0x22, 0x23, 0x1, 0x0, 0x0, 0x0
AGESA_TP:[B000A914]
NbioSmuServiceRequestV13 Enter
Service Request 0x9
Service Request Argument 0x22, 0x23, 0x1, 0x0, 0x0, 0x0
AGESA_TP:[B000AA09]
NbioSmuServiceRequestV13 Exit
AGESA_TP:[B000A915]
Return Args = 0x3, 0x1, 0x1, 0x0, 0x0, 0x0
SmuDxioServiceRequest Exit Status = 0
SmuDxioServiceRequest Entry
GnbHandle Found
Input Args = 0x307, 0x0, 0x0, 0x0, 0x0, 0x0
AGESA_TP:[B000A914]
NbioSmuServiceRequestV13 Enter
Service Request 0x9
Service Request Argument 0x307, 0x0, 0x0, 0x0, 0x0, 0x0
AGESA_TP:[B000AA09]
NbioSmuServiceRequestV13 Exit
AGESA_TP:[B000A915]
Return Args = 0x307, 0x0, 0x0, 0x0, 0x0, 0x0
SmuDxioServiceRequest Exit Status = 0
SmuDxioServiceRequest Entry
GnbHandle Found
Input Args = 0x9, 0x0, 0x0, 0x0, 0x0, 0x0
AGESA_TP:[B000A914]
NbioSmuServiceRequestV13 Enter
Service Request 0x9
Service Request Argument 0x9, 0x0, 0x0, 0x0, 0x0, 0x0
AGESA_TP:[B000AA09]
Thanks.
