cancel
Showing results for 
Search instead for 
Did you mean: 

PC Processors

alexandru_lapugean
Journeyman III

AMD AGESA Combo-AM4 1.0.0.3

Hello,

My system config is:

CPU:                  AMD Ryzen 7 2700X (Pinnacle Ridge, PiR-B2)

Motherboard:      ASRock X470 Taichi Ultimate

BIOS:          P2.00, 12/17/2018 (AMD AGESA to 1.0.0.6.)

Memory:        32768 MBytes @ 1453 MHz, 16-17-17-34
               - 16384 MB PC25600 DDR4 SDRAM - Corsair CMK32GX4M2B3200C16
               - 16384 MB PC25600 DDR4 SDRAM - Corsair CMK32GX4M2B3200C16

How will upgrading to AMD AGESA Combo-AM4 1.0.0.3 impact my CPU? Will I have improved performance or should I stick to AMD AGESA to 1.0.0.6.?

Will I get ACPI CPPC2?

On Asrock website it says that for AMD AGESA Combo-AM4 1.0.0.3 ABB *ASRock do NOT recommend updating this BIOS if Pinnacle, Raven, Summit or Bristol Ridge CPU is being used on your system .... so I'll steer clear of it.

Thank you.

2 Replies
teemujkl
Journeyman III

You seem to be able to run at 2900 Mhz, which is more than I can. I also have CMK16GX4M2B3200C16 modules, and I have now noticed on several forums that this memory might be problematic. Does anyone have this memory running nice and stable at 3200 Mhz with a Pinnacle Ridge processor?

0 Likes
alexandru_lapugean
Journeyman III

I'm running my ram @2933Mhz without issues, after upgrading form PinnaclePI-AM4_1.0.0.4 to PinnaclePI-AM4_1.0.0.6. However I had to manually set the frequency, timings and voltage.

Also this is a dual rank ram, @2933 it will have the performance of a higher frequency single rank ram, maybe even 3200. The best upgrade advice for Ryzen performance is dual rank ram at the highest frequency and lowest timings.

0 Likes