Hi everyone,
I have 4x AMD Instinct Mi100 GPUs and a Gigabyte G292-z20 server and the cards are not recognized. The PCIe slots show up as empty in the BMC.
The server is on latest firmware and latest BIOS.
I have above 4g decoding enabled and uefi set in the BIOS.
I’ve rebased the cards in different risers and measured that the GPU power plugs have the right voltages.
I've tested the PCIe slots with an Nvidia card, which is detected just fine.
Are these cards not supported in that server or am I missing some BIOS setting?
Any help and suggestions are much appreciated.
